UNE 43-505-1985 《纺织玻璃，硅丝，玻璃丝和线圈层丝 实际浓度的确定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24527-1980 Pin plugs Design and dimensions《销塞 结构及尺寸》.pdf

GOST 24528-1980 Flanged overrunning stop cutting blades Design and dimensions《步进式剪断用带法兰的刀片 结构及尺寸》.pdf

GOST 24529-1980 Flanged overrunning stop cutting blades with lugs Design and dimenmions《步进式剪断用带凸缘和法兰的刀片 结构及尺寸》.pdf

GOST 24530-1980 Racing pivot stops Design and dimensions《活节节距定位器 结构及尺寸》.pdf

GOST 24531-1980 Wedge holder Design and dimensions《加楔持紧器 结构及尺寸》.pdf

GOST 24532-1980 Unstuckers Design and dimensions《脱件器 结构及尺寸》.pdf

GOST 24533-1980 Pin-hole punches Design and dimensions《冲孔冲头 结构及尺寸》.pdf

GOST 24534-1980 Bushes for pin-hole punches Design and dimensions《冲孔冲头用衬套 结构及尺寸》.pdf

GOST 24535-1980 Stepped bushes for composite springs Design and dimensions《车辆弹簧用阶梯衬套 结构及尺寸》.pdf