UNE 55 055 《甾醇的性质》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN-EN 28674-1992 9375 Hexagon nuts style 2 with metric fine pitch thread - Product grades A and B《2型六角头螺母 米制细牙螺纹 产品等级A和B》.pdf

NBN-EN 28675-1992 1875 Hexagon thin nuts with metric fine pitch thread - Product grades A and B《带米制细牙螺纹的六角头薄螺母 产品等级A和B》.pdf

NBN-EN 28676-1992 6875 Hexagon head screws with metric fine pitch thread - Product grades A and B《带米制细牙螺纹的六角头螺钉 产品等级A和B》.pdf

NBN-EN 28692-1993 0625 Water quality Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692 1989)《水质 用单细胞绿藻类进行的淡水藻类生长抑制性试验（IS.pdf

NBN-EN 287-1-1992 3750 《焊工合格证 熔化焊接 第1部分：钢》.pdf

NBN-EN 287-2-1992 8125 《焊工合格证 熔化焊接 第2部分：铝及铝合金》.pdf

NBN-EN 28733-1992 1250 Parallel pins with internal thread unhardened《未淬硬钢制有内螺纹的平行销》.pdf

NBN-EN 28734-1992 1250 Parallel pins hardened (Dowel pins)《淬硬钢的平行销》.pdf

NBN-EN 28735-1992 3125 Parallel pins with internal thread hardened《淬硬钢制有内螺纹的平行销》.pdf