UNE 69-013-1991 《无内胎汽车轮胎用迅速关合型胶化闸门的规格及用途》.pdf

相关资源

GB T 2977-1997 载重汽车轮胎系列.doc

JT T 303-1996 汽车轮胎使用与维修要求.pdf

GB T 19389-2016 载重汽车轮胎滚动周长试验方法.pdf

GB T 33830-2017 载重汽车轮胎雪地抓着性能试验方法.pdf

GB T 7036.1-2009 充气轮胎内胎.第1部分 汽车轮胎内胎.pdf

SN T 1053-2002 出口住房式汽车轮胎检验规程.pdf

GB T 2977-2016 载重汽车轮胎规格、尺寸、气压与负荷.pdf

GB 7036.1-1997 充气轮胎内胎 第1部分：汽车轮胎内胎.pdf

GB 9744-1997 载重汽车轮胎.doc

JIS D 4230-1998 汽车轮胎.doc

猜你喜欢

ASTM D2556-2011 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties 《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2556-2014 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2557-1998(2004) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55℃(-450至-.pdf

ASTM D2557-1998(2010)e1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55176C(-.pdf

ASTM D2559-2004 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf

ASTM D2559-2009 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions.pdf

ASTM D2559-2010 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿条件下用结构层压木材制品用胶粘剂标准规范》.pdf

ASTM D2559-2010a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf

ASTM D2559-2012a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions 《室外暴露条件中层压结构木制品用胶粘剂的标准规格》.pdf