UNE 7 152 《乳化沥青的筛选试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS 16 11 41-1986 Plastics - Determination of apparent density of material that can be poured from a specified funnel《塑料 测定从特定漏斗中倒出材料的表观密度》.pdf

SIS SS 16 11 43-1982 Plastics - Determination of apparent bulk density of compacted moulding material《塑料 压实模塑材料表观堆密度的测定》.pdf

SIS SS 16 11 47-1983 Plastics - Determination of the melt flow rate of thermoplastics《塑料 热塑性熔体流动速率的测定》.pdf

SIS SS 16 11 54-1980 Plastics Injection moulding test specimens of thermoplastic materials《塑料 热塑性材料注射成型试样》.pdf

SIS SS 16 11 55-1984 Plastics - Preparation of test specimens by machining《塑料 试样的机加工制备》.pdf

SIS SS 16 11 56-1984 Plastics Amorphous thermoplastic moulding materials Preparation of test specimens with a defined level of shrinkage Part 1 Test specimens in the form of par.pdf

SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2 Test specimens in the form of .pdf

SIS SS 16 11 61-1983 Plastics - Determination of water absorption《塑料 吸水率测定》.pdf

SIS SS 16 11 63-1984 Plastics Determination of ash Part 1 General methods《塑料 灰分的测定 第1部分：一般方法》.pdf