UNE 80-301-1M-1988 《水泥的定义，分类及规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D818-A2-2010 POLYPROPYLENE (PP) SHEET 40% LONG GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强的聚丙烯（PP）平布 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D821-A-2006 ACETAL (POM) COPOLYMER 25 % GLASS BEAD FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃珠填充的乙缩醛共聚物（POM）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM RIGID TO BE USED WITH FORD WSS-M99P1111-A 《刚性聚苯醚+聚苯乙烯（PPE+PS）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D825-A-2010 POLYPROPYLENE (PP) COPOLYMER 7% MINERAL FILLED COLOR PIGMENTED LOW GLOSS MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用低光泽、着色型7%矿物填充的.pdf

FORD WSB-M4D828-A-2006 POLYAMIDE 6 (PA6) MODIFIED FLEXIBLE EXTRUSION MOLDING COMPOUND (Use WSS-M4D933-A1 06 07 1995)《软质聚酰胺6改性挤塑成型料 使用WSS-M4D933-A1 06 07 1995》.pdf

FORD WSB-M4D831-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 65 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度65 D的热塑性聚氨酯弹性体(TPUR)成型料 与标准FOR.pdf

FORD WSB-M4D833-A-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA) MEDIUM HEAT RESISTANT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D834-A-2010 POLYPROPYLENE (PP) 15% GLASS SPHERE REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃珠增强的受热稳定的聚丙烯（PP）成型料 与标准FORD WSS-.pdf

FORD WSB-M4D835-A-2010 POLYARYLSULFONE (PAS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚芳砜（PAS）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf