UNE 80-402-1987 《水泥的供应及接收控制》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D854-A2-2010 POLYPROPYLENE (PP) 40% GLASS FIBER REINFORCED REMANUFACTURED COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的聚丙烯（PP）废料再生成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSB-M4D857-A2-2006 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED 16 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《16%玻璃纤维增强的苯乙烯马来.pdf

FORD WSB-M4D860-A-2011 ACETAL (POM) COPOLYMER 25% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%矿物填充模塑材料乙酸醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D861-A-2006 POLYPHTHALAMIDE (PPA) 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强、受热稳定的聚邻苯二甲酰胺(PPA)成型料 与标准.pdf

FORD WSB-M4D862-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 60 D HARDNESS 15 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的硬度为60.pdf

FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP) 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强模塑材料聚丙烯(PP) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《50%长玻璃纤维增强模塑材料聚丙烯(PP)均聚物 与福特WSS-M99P.pdf

FORD WSB-M4D866-A1-2008 ABS + POLYCARBONATE (ABS+PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯(ABS+PC)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FO.pdf

FORD WSB-M4D866-A2-2008 ABS + POLYCARBONATE (ABS+PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D866-A1)《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯(ABS+PC)成型料 与标准FO.pdf