UNE 9-109-1986 《锅炉的测量，控制，警报和安全装备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 262-1-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions《螺距为7mm 的带间隙和直侧面的圆螺纹 标称尺寸》.pdf

DIN 262-2-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of .pdf

DIN 2626-2016 Line blanks《线坯》.pdf

DIN 26281-2010 de 5486 Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings (ISO TS 16281 2008 + Cor 1 2009)《滚动轴承 普通负荷轴承用改良.pdf

DIN 263-1-2000 Single- and double-start acme thread with clearance for rail vehicles - Part 1 Dimensions《有轨车辆用带间隙的单头和双头爱克米螺纹 第1部分 尺寸》.pdf

DIN 263-3-2003 Single- and double-start acme thread with clearance for rail vehicles - Part 3 Thread gauges Thread dimensions and permissible wear of thread gauge《铁路车辆用带间隙的单头和双头爱克米.pdf

DIN 264-1-1973 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm Nominal Dimensions《螺距为 7mm 的带间隙和直侧面的圆螺纹 第1部分 公称尺寸》.pdf

DIN 264-2-1973 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of S.pdf

DIN 267-13-2007 Fasteners - Technical specifications - Part 13 Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 C to +700 .pdf