UNE EN 302-3-1994 Adhesives for load-bearing timber structures Test methods Part 3 Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE J 1542-2009 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability《车辆和工业热交换器热循环耐久性的实验室测试》.pdf

SAE J 1544-2011 Revolutions per Mile and Static Loaded Radius for Off-Road tires《越野轮胎每英里转数和静负荷半径》.pdf

SAE J 1549-1988 Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies.pdf

SAE J 1549-1988 Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies《喷嘴夹持器组件校准的柴油燃料注入泵的确认》.pdf

SAE J 1553-1995 Cross Peel Test for Automotive-Type Adhesives for Fiber reinforced plastic (FRP) Bonding《粘合纤维增强塑料(FRP)用的车用胶粘剂的交叉剥离试验》.pdf

SAE J 1561-2001 Laboratory Speed Test Procedure for Passenger Car Tires《客车轮胎的实验室速度试验过程》.pdf

SAE J 1562-2009 Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet《锌和锌合金的选择(热浸和电镀涂覆钢薄板)》.pdf

SAE J 1568-2012 Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders《液压盘式制动器缸的塑料活塞材料》.pdf

SAE J 1570-2012 Rubber Dust Boots for the Hydraulic Disc Brake Piston《液压盘式制动器活塞用橡胶灰尘防护罩》.pdf