UNI 3959-1957 Coupling heads for semicoupling of compressed air brakes and for coupling of compressed air ducts of railway rolling stock Stop pin Ring nuts Washer Check valve Gaske.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 2334-1997 Chromic-sulphuric acid pickle of aluminium and aluminium alloys《铝和铝合金铬硫酸液》.pdf

BS EN 2335-2005 Aerospace series — Bearings spherical plain in corrosion resisting steel without assembly slot — Dimensions and loads《航空航天系列 无装配槽的耐腐蚀钢制普通球面轴承 尺寸和载荷》.pdf

BS EN 2336-2005 Aerospace series - Bearings spherical plain in steel with assembly slots - Dimensions and loads《航空航天系列 带装配槽的钢制球面滑动轴承 尺寸和负载》.pdf

BS EN 2337-2006 Spherical plain bearings - Technical specification《航空航天系列 球面关节轴承 技术规范》.pdf

BS EN 2338-2001 Aerospace series - Sheets hot rolled in titanium and titanium alloys - Thickness 0 8 mm a 6 mm - Dimensions《航空航天系列 热轧钛和钛合金薄板材 厚度为0 8mm 6mm 尺寸》.pdf

BS EN 2339-2001 Aerospace series - Sheets cold rolled in titanium and titanium alloys - Thickness 0 2 mm a 6 mm - Dimensions《航空航天系列 冷轧钛和钛合金薄板材 厚度为0 2mm a 6mm 尺寸》.pdf

BS EN 234-1997 Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration《卷材墙面饰层 后序装饰用墙面饰层规范》.pdf

BS EN 2344-2001 Aerospace series - Round bars machined in heat resisting alloys - Diameter 10 mm D 180 mm - Dimensions《航空航天系列 耐热合金制的圆形棒材 直径大于10mm小于180mm 尺寸》.pdf

BS EN 2346-002-2006 Aerospace series - Cable electrical fire resistant - Operating temperatures between -65 C and 260 C - General《航空航天系列 耐火电缆 工作温度为-65℃～260℃ 总则》.pdf