UNI 4782-1961 Overshoes for agricultural crawler tractors 《农用履带式拖拉机的外履带节》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 85005-7-1999 Ships and marine technology - Graphical symbols for technical documentation - Part 7 Pressure tanks《船舶和航海技术 技术文献的图形符号 第7部分 压力液体舱》.pdf

DIN 85005-8-2001 Ships and marine technology - Graphical symbols for technical documentation - Part 8 Power transmission plant and steering gear components《船舶和船舶技术 技术文献图形符号 第8部分 动力.pdf

DIN 85005-9-1999 Ships and marine technology - Graphical symbols for technical documentation - Part 9 Suction- and discharge sockets《船舶和航海技术 技术文献的图形符号 第9部分 吸入和排放管的管座》.pdf

DIN 85031-2014 Ships and marine technology - Steel expansion joints《船舶与海洋技术 钢制扩展伸缩接头》.pdf

DIN 85051-1-2012 Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1 Operating pressures up to 16 bar《造船用管道压装系统 通用要求和试验方法 第1部分 1.pdf

DIN 85339-1996 Hexagon head screw plugs - With retaining pin and bleeding hole《带台阶和外六角锁紧螺钉 锁紧头和排放孔》.pdf

DIN 85387-1-1998 Ships and marine technology - Loose flanges and welding necks extra light duty - Part 1 Loose flanges DN 32 to DN 50 PN up to 25 DN 65 to DN 125 PN up to 10《船舶和海上技.pdf

DIN 85387-2-1998 Ships and marine technology - Loose flanges and welding necks extra light duty - Part 2 Welding necks made of CuNi10Fe1 6Mn DN 32 to DN 50 PN up to 25 DN 65 to DN .pdf

DIN 85389-1998 Ships and marine technology - Flanges on castings extra light duty - DN 32 to DN 50 PN up to 25 DN 65 to DN 125 PN up to 10 - Principles of design《船舶和海洋技术 超轻型的活动法兰和对.pdf