UNI 6986-1971 Measuring instruments Not go screw plug gauges check plugs for new solid go and not go screw ring gauges and wear check plugs for solid and adjustable go and not go snomi.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 2398-1978 Hydraulic pneumatic and lubricating systems Tee and reduce tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn.pdf

TCVN 2399-1978 Hydraulic pneumatic and lubricating systems Tee end passage asymetric tube connections with cut ring for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液.pdf

TCVN 2401-1978 Hydraulic pneumatic and lubricating systems Cross passage tube connections with cut ring for 40MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40.pdf

TCVN 2402-1978 Hydraulic pneumatic and lubricating systems Cross reduce tube connections with cut ring for 40 MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40.pdf

TCVN 2403-1978 Hydraulic pneumatic and lubricating systems Cross passage end tube connections with cut ring for Pn 40MN m2 (~400 Kgf cm2) Construction and basic dimensions《液压气动和润滑系.pdf

TCVN 2404-1978 Hydraulic pneumatic and lubricating systems Tube connections partition unions for 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40MN m(~400Kgf.pdf

TCVN 2405-1978 Hydraulic pneumatic and lubricating systems Dead tube connections for Pn 40MN m2 (~400Kgf cm2) Construction and basic dimensions《液压气动和润滑系统 Pn为40MN m(~400Kgf cm)的封闭管接.pdf

TCVN 2406-1978 Tube connections for hydraulic pneumatic and lubrication Passageunions for Pn 40 MN m2 (~400 Kgf cm2) Construction and basic dimensions 《液压气动和润滑管接头 Pn为40MN m(~400Kgf.pdf

TCVN 2407-1978 Tube connections for hydraulic pneumatic and lubrication Reduce Unions for Pn 40 MN m2 (~400 KG cm2) Construction and dimensions 《液压气动和润滑管接头 Pn为40MN m(~400Kgf cm)的异径.pdf