UNI 7003-1971 Measuring instruments Not go screw gauging members with profil with truncated flanks and collet for ISO metric threads with nominal diameter above 50 to 100 mm 《测量工具 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 10889-3-2016 Tool holders with cylindrical shank Type B with rectangular radial seat《圆柱形柄刀夹 矩形径向座的B型刀柄》.pdf

BS ISO 10889-4-2016 Tool holders with cylindrical shank Type C with rectangular axial seat《圆柱形柄刀夹 矩形轴向座的C型刀柄》.pdf

BS ISO 10889-5-2016 Tool holders with cylindrical shank Type D with more than one rectangular seat《圆柱形柄刀夹 一座以上矩形座D形刀柄》.pdf

BS ISO 10889-6-2016 Tool holders with cylindrical shank Type E with cylindrical seat《圆柱形柄刀夹 圆柱状座的E型刀柄》.pdf

BS ISO 10889-7-2016 Tool holders with cylindrical shank Type F with taper seat《圆柱形柄刀夹 锥形座的F型刀柄》.pdf

BS ISO 10896-2-2016 Rough-terrain trucks Safety requirements and verification Slewing trucks《崎岖地形的卡车 安全要求和验证 回转卡车》.pdf

BS ISO 10896-4-2015 Rough-terrain trucks Safety requirements and verification Additional requirements for variable-reach trucks handling freely suspended loads《崎岖地形卡车 安全要求和验证 伸缩臂式卡.pdf

BS ISO 10896-5-2015 Rough-terrain trucks Safety requirements and verification Interface between rough-terrain truck and integrated personnel work platform《崎岖地形卡车 安全要求和验证 崎岖地形卡车和集成人.pdf

BS ISO 10896-6-2015 Rough-terrain trucks Safety requirements and verification Tilting operator-s cabs《崎岖地形卡车 安全要求和验证 可倾驾驶室》.pdf