UNI 7006-1971 Measuring instruments Not go gauging members with taper shaft for nominal sizes above 1 5 to 50 mm 《测量工具 标称尺寸超过1 5－50mm 的带圆锥手柄连接光滑不过端校准工具》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS 507-1990 ISO system of limits and fits Selection of fits with basic holes《公差与配合ISO系统 基本孔配合选择》.pdf

SIS SS 508-1990 ISO system of limits and fits Selection of fits with basic shafts《公差与配合ISO系统 主轴配合选择》.pdf

SIS SS 573-1980 Short screwing taps Inch screw threads Coarse pitch《短丝锥 英制螺纹 大螺距》.pdf

SIS SS 574-1980 Short screwing taps Inch screw threads Fine pitch《短丝锥 英制螺纹 小螺距》.pdf

SIS SS 584-1980 Shell reamers with taper bore and slot drive《铰刀 带镗圆锥孔和曲柄传动的筒形铰刀》.pdf

SIS SS 585-1980 Arbors for shell reamers with fitment with tenon drive《铰刀 带器具和榫传动套式铰刀用轴心》.pdf

SIS SS 597-1991 Taper angles and conical tapers《锥角和锥形接续器》.pdf

SIS SS 598-1991 Angles and rates of prisms on wedges and prisms《楔和光楔上棱镜角度和等级》.pdf

SIS SS 665-1985 《图纸 焊接痕迹，注册，定义和一般信息》.pdf