UNIT 101-1954 《标准数字》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D442-A-2010 POLYCARBONATE - POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯、聚对苯二甲酸丁二醇酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D442-A3-2010 PC PBT ALLOY RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷聚碳酸酯(PC) 聚对苯二甲酸丁二醇酯(PBT)混合橡胶改性成型料 与标准FORD WSS-M99P1111-.pdf

FORD ESB-M4D462-A1-2010 POLYBUTYLENE TEREPHTHALATE IMPACT MODIFIED - 10 % GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的冲击改性聚对苯二甲酸丁二醇酯 与标准FORD WSS-M99P11.pdf

FORD ESB-M4D462-A3-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED - 30% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的冲击改性聚对苯二甲酸丁二醇酯(PBT) 与标准FORD .pdf

FORD ESB-M4D464-A2-2010 ACETAL HOMOPOLYMER MODIFIED - HIGH IMPACT GRADE - PIGMENTED TO BE USED WITH FORD WSS-M99P1111-A 《着色高抗冲级改性聚甲醛均聚物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D483-A1-2011 ABS MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部低光泽紫外线稳定中等冲击力着色的丙烯腈 与福特WSS-M99P1111-A 一起.pdf

FORD ESB-M4D483-A2-2011 ABS MEDIUM IMPACT- HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部低光泽紫外线稳定着色的中等冲击力且耐热的丙烯腈 与.pdf

FORD ESB-M4D489-A2-2010 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED 20 % GLASS FIBER 10 % ACRYLIC REGRIND REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维 10%.pdf

FORD ESB-M4D489-A3-2010 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《橡胶改性的苯乙烯马来酐三元共聚物（SMA） 与标准FORD WSS-M99P1111-A一起使用 》.pdf