UNIT 368-1974 《建筑调整系数》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E60-135-1996 Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle Testing of the accuracy 《带立式主轴的转塔式和单轴坐标钻床的试验条件 精确度试验》.pdf

NF E60-137-1996 Acceptance conditions of mechanical dividing heads for machine tools Testing of accuracy 《机床机械分度头的验收条件 精确度试验》.pdf

NF E60-138-1993 Acceptance conditions for gear hobbing machines Testing of the accuracy 《滚齿机的验收条件 精确度的检测》.pdf

NF E60-172-3-1999 Test conditions for machining centres Part 3 geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) 《多工序数控加工中心的试验条件.pdf

NF E60-172-4-1998 Test conditions for machining centres Part 4 accuracy and repetability of positioning of linear and rotary axes 《多工序数控加工中心的试验条件 第4部分 线性轴和旋转轴定位的精确度和可重复性》.pdf

NF E60-172-5-1998 Test conditions of machining centres Part 5 accuracy and repeatability of positioning of work-holding pallets 《多工序数控加工中心的试验条件 第5部分 工件夹紧盘定位的精确度和可重复性》.pdf

NF E60-181-2001 Manufacturing systems - Acceptance conditions - Piece manufacture suitability evaluation method 《生产系统 验收条件 单件生产稳定性评价方法》.pdf

NF E60-182-2002 Manufacturing systems - Performance indications - Overall equipment effectiveness (TRS) - Global equipment effectiveness (TRG) - Economic equipment effectiveness (T.pdf

NF E60-202-1996 Machine-tools Lubrification systems 《机床 润滑系统》.pdf