WES 7700-3-2012 Repair welding of pressure equipment - Part 3 Butt-welded insert plates.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 1700-18-15-2004 Fasteners Part 18 Rivets Section 15 Open end blind rivets with break pull mandrel and countersunk head - A2 A2《紧固件 第18部分：铆钉 第15节：开口型沉头抽芯盲铆钉 A2 A2》.pdf

SANS 1700-18-16-2004 Fasteners Part 18 Rivets Section 16 Open end blind rivets with break pull mandrel and protruding head - Cu St or Cu Br or Cu SSt《紧固件 第18部分：铆钉 第16节：开口型盘头抽芯盲铆钉 C.pdf

SANS 1700-18-17-2004 Fasteners Part 18 Rivets Section 17 Open end blind rivets with break pull mandrel and countersunk head - Cu St or Cu Br or Cu SSt《紧固件 第18部分：铆钉 第17节：开口型沉头抽芯盲铆钉 .pdf

SANS 1700-18-18-2004 Fasteners Part 18 Rivets Section 18 Open end blind rivets with break pull mandrel and protruding head - NiCu St or NiCu SSt《紧固件 第18部分：铆钉 第18节：开口型盘头抽芯盲铆钉 NiCu S.pdf

SANS 1700-18-19-2004 Fasteners Part 18 Rivets Section 19 Closed end blind rivets with pull mandrel and protruding head - A2 SSt《紧固件 第18部分：铆钉 第19节：封闭盘头型抽芯盲铆钉 A2 SSt》.pdf

SANS 1700-18-2-2004 Fasteners Part 18 Rivets Section 2 Blind rivets - Terminology and definitions《紧固件 第18部分：铆钉 第2节：盲铆钉 属于和定义》.pdf

SANS 1700-18-3-2004 Fasteners Part 18 Rivets Section 3 Blind rivets - Mechanical testing《紧固件 第18部分：铆钉 第3节：盲铆钉 机械测试》.pdf

SANS 1700-18-4-2004 Fasteners Part 18 Rivets Section 4 Closed end blind rivets with break pull mandrel and protruding head - AIA St《紧固件 第18部分：铆钉 第4节：封闭型盘头抽芯盲铆钉 AIA St》.pdf

SANS 1700-18-5-2004 Fasteners Part 18 Rivets Section 5 Closed end blind rivets with break pull mandrel and countersunk head - AIA St《紧固件 第18部分：铆钉 第5节：封闭型沉头抽芯盲铆钉 AIA St》.pdf