1、UL 1659ISBN 0-7629-0221-3Attachment Plug Blades for Usein Cord Sets and Power-SupplyCordsAugust 19, 1998 UL 1659 tr1Underwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for SafetyforAttachment Plug Blades for Use in Cord Sets and Power-Supply Cords, UL 1659Second
2、 Edition, Dated September 30, 1997Revisions: This Standard contains revisions through and including August 19, 1998. UL is in the process ofconverting its Standards for Safety to the Standard Generalized Markup Language (SGML). SGML - aninternational standard (ISO 8879-1986) - is a descriptive marku
3、p language that describes a documentsstructure and purpose, rather than its physical appearance on the page. Significant benefits that will result fromULs use of SGML are increased productivity, reduced turnaround times, and data and information consistency,reusability, shareability, and portability
4、. The changes noted in these revised pages are needed to modify theformat and layout of this Standard to allow it to be converted to SGML. These editorial changes are now ineffect.A change is indicated by a note following the affected item. The note is preceded and followed by an asterisk.The revisi
5、ons dated August 19, 1998 include a reprinted title page (page 1) for this Standard.The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a ULservice and the compliance of a product with respect to the requirements for that product and service, or if
6、 thereare questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be alteredin any way. All of ULs
7、 Standards and all copyrights, ownerships, and rights regarding those Standards shallremain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmittedin any form by any means, electronic, mechanical photocopy
8、ing, recording, or otherwise without priorpermission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only ifit incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed
9、or implied, including but notlimited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, includingloss of profits, lost savings, loss of data, or any other damages arising out
10、of the use of or the inability to usethis Standard, even if UL or an authorized UL representative has been advised of the possibility of suchdamage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardlessof the form of the claim.UL will attempt to answ
11、er support requests concerning WordPerfect, Envoy, and Standards-on-Diskette.However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolveevery support request. UL supports a Standards-on-Diskette only if it is used under the conditions and operatings
12、ystems for which it is intended. ULs support policies may change from time-to-time without notification.tr2 August 19, 1998 UL 1659UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats,and the like of both its printed and electronic Standards
13、without prior notice.Standards-on-Diskette purchasers agree to defend, indemnify, and hold UL harmless from and against anyloss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from anyerror or deviation introduced while purchaser is storing a Standard
14、-on-Diskette on the purchasers computersystem.If a single-user version Standards-on-Diskette was purchased, one copy of this Standard may be stored on thehard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of amultiple-user computer in such a manne
15、r that this Standard may only be accessed by one user at a time andfor which there is no possibility of multiple concurrent access. The original distribution diskette should be storedin a safe place.If a multiple-user version Standards-on-Diskette was purchased, one copy of the Standard may be store
16、d ona single LAN file-server, or on the permanent storage device of a multiple-user computer. The number ofconcurrent users shall not exceed the number of users authorized for the Standards-on-Diskette version. Theoriginal distribution diskette should be stored in a safe place.Standards-on-Diskette
17、are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from each single-userversion of a Standards-on-Diskette. Only one copy of the Standard may be printed for each authorized userof a mul
18、tiple-user version of a Standards-on-Diskette. An employee of an organization purchasing a Standard-on-Diskette can make a copy of the page or pages being viewed for their own fair and/or practical internal use.Because of differences in the computer/software/printer setup used by UL and those of Sta
19、ndards-on-Diskettepurchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or theprinted Standard.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having fut
20、ure effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective date arelocated after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified f
21、uture effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unless theapplicant specifically requests that the product be judged under the current requirements. However, if theapplicant elects this option, it
22、should be noted that compliance with all the requirements in this Standard willbe required as a condition of continued Recognition and Follow-Up Services after the effective date, andunderstanding of this should be signified in writing.Copyright 1998 Underwriters Laboratories Inc.Page Datetr1, tr2 .
23、 August 19, 19981 . September 30, 1997 (Reprinted August 19, 1998)2 11 . September 30, 199712, 12A, 12B . August 19, 199813 16 . September 30, 199717, 18 . August 19, 199819, 20 . September 30, 199721, 22, 22A, 22B . August 19, 199823 28 . September 30, 1997SEPTEMBER 30, 1997(Title Page Reprinted: A
24、ugust 19, 1998)1UL 1659Standard forAttachment Plug Blades for Use in Cord Setsand Power-Supply CordsFirst Edition September, 1993Second EditionSeptember 30, 1997An effective date included as a note immediately following certain requirements is oneestablished by Underwriters Laboratories Inc.Revision
25、s of this standard will be made by issuing revised or additional pages bearingtheir date of issue. A UL Standard is current only if it incorporates the most recentlyadopted revisions, all of which are itemized on the transmittal notice thataccompanies the latest set of revised requirements.ISBN 0-76
26、29-0221-3COPYRIGHT 1993, 1998 UNDERWRITERS LABORATORIES INC.2 PLUG BLADES FOR CORD SETS & POWER-SUPPLY CORDS UL 1659 SEPTEMBER 30, 1997No Text on This PageSEPTEMBER 30, 1997 PLUG BLADES FOR CORD SETS & POWER-SUPPLY CORDS UL 1659 3CONTENTSFOREWORDINTRODUCTION1 Scope . 52 Glossary . 53 Units of Measur
27、ement . 54 References . 6CONSTRUCTION5 General . 66 Materials . 67 Dimensions . 6PERFORMANCE8 General . 139 Representative Assemblies . 1310 Preparation of Assemblies . 1511 Temperature Measurements . 1512 Secureness Test . 1713 Static Heating Test . 2014 Heat-Cycling Test . 2315 Pull-Out Test . 241
28、6 Compression Force Test . 2517 10 Day Moist Ammonia Air Test . 25MARKING18 General . 2519 Instructions for Assembly . 264 PLUG BLADES FOR CORD SETS & POWER-SUPPLY CORDS UL 1659 SEPTEMBER 30, 1997FOREWORDA. This Standard contains basic requirements for products covered by UnderwritersLaboratories In
29、c. (UL) under its Follow-Up Service for this category within thelimitations given below and in the Scope section of this Standard. These requirementsare based upon sound engineering principles, research, records of tests and fieldexperience, and an appreciation of the problems of manufacture, instal
30、lation, and usederived from consultation with and information obtained from manufacturers, users,inspection authorities, and others having specialized experience. They are subject torevision as further experience and investigation may show is necessary or desirable.B. The observance of the requireme
31、nts of this Standard by a manufacturer is one ofthe conditions of the continued coverage of the manufacturers product.C. A product which complies with the text of this Standard will not necessarily bejudged to comply with the Standard if, when examined and tested, it is found to haveother features w
32、hich impair the level of safety contemplated by these requirements.D. A product employing materials or having forms of construction differing from thosedetailed in the requirements of this Standard may be examined and tested accordingto the intent of the requirements and, if found to be substantiall
33、y equivalent, may bejudged to comply with the Standard.E. UL, in performing its functions in accordance with its objectives, does not assumeor undertake to discharge any responsibility of the manufacturer or any other party.The opinions and findings of UL represent its professional judgment given wi
34、th dueconsideration to the necessary limitations of practical operation and state of the artat the time the Standard is processed. UL shall not be responsible to anyone for theuse of or reliance upon this Standard by anyone. UL shall not incur any obligation orliability for damages, including conseq
35、uential damages, arising out of or in connectionwith the use, interpretation of or reliance upon this Standard.F. Many tests required by the Standards of UL are inherently hazardous andadequate safeguards for personnel and property shall be employed in conductingsuch tests.SEPTEMBER 30, 1997 PLUG BL
36、ADES FOR CORD SETS & POWER-SUPPLY CORDS UL 1659 5INTRODUCTION1 Scope1.1 General1.1.1 These requirements cover the blades of attachment plugs and current taps intended to be connectedto the conductors of flexible cords using crimped connections, for use on cord sets and power-supply cordscomplying wi
37、th the Standard for Cord Sets and Power-Supply Cords, UL 817, within the limits set forth in 1.2.1for type of blades and 1.3.1 for size of conductors.1.1.2 A product that contains features, characteristics, components, materials, or systems new or different fromthose covered by the requirements in t
38、his Standard, and that involves a risk of fire, electric shock, or injury topersons shall be evaluated using the appropriate additional component and end-product requirements asdetermined necessary to maintain the acceptable level of safety as originally anticipated by the intent of thisStandard. A
39、product whose features, characteristics, components, materials, or systems conflict with specificrequirements or provisions of this Standard cannot be judged to comply with this Standard. Where consideredappropriate, revision of requirements shall be proposed and adopted in conformance with the meth
40、odsemployed for development, revision, and implementation of this Standard.1.2 Type of blades1.2.1 These requirements apply to blades, solid and folded, of attachment plugs and current taps rated 15 or20 A, for general purpose use. These requirements do not apply to the grounding blade (pin) of grou
41、nding typeattachment plugs or current taps.1.3 Conductor sizes1.3.1 These requirements apply to blades intended to be attached to Nos. 18 AWG (0.82 mm ) 10 AWG (5.32mm ) conductors.22 Glossary2.1 For the purpose of this Standard the following definitions apply.2.2 BLADE The part of an attachment plu
42、g or current tap intended to be inserted into the contacts of an outletdevice of matching configuration and the integral extension of this part, located within the attachment plug orcurrent tap, to which the conductor of a flexible cord is connected.2.3 CONTACT SURFACE AREA The area on each side of
43、a blade that is intended to make electrical contactwith the contacts of an outlet device.2.4 CRIMPED CONNECTION An electro-mechanical connection made between a blade and a conductorby compressing the portion of the blade, termed the integral extension in 2.2, against the conductor.3 Units of Measurement3.1 If a value for measurement is followed by a value in other units in parentheses, the second value may beonly approximate. The first stated value is the requirement.6 PLUG BLADES FOR CORD SETS & POWER-SUPPLY CORDS
