1、 INTERNATIONAL STANDARD IEC 60092-352Third edition 2005-09Electrical installations in ships Part 352: Choice and installation of electrical cables Reference number IEC 60092-352:2005(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 serie
2、s. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the ba
3、se publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, i
4、s available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications iss
5、ued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line informatio
6、n is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for fu
7、rther information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 60092-352Third edition 2005-09Electrica
8、l installations in ships Part 352: Choice and installation of electrical cables IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writin
9、g from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch X For price, see current catalogue PRICE CODE Commission Electrotechnique Internati
10、onale International Electrotechnical Commission 2 60092-352 IEC:2005(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.8 2 Normative references .8 3 Types, construction, installation and operating conditions of cables .9 3.1 Types of cables.9 3.2 Voltage rating10 3.3 Cross-sectional areas of conductors
11、and current carrying capacities .11 3.4 Voltage drop15 3.5 Estimation of lighting loads15 3.6 Parallel connection of cables.15 3.7 Separation of circuits.16 3.8 Short circuit capacity (withstand capability). 16 3.9 Conductor .16 3.10 Insulation material.16 3.11 Screen, core screen or shield16 3.12 S
12、heathing material 16 3.13 Metallic braid or armour.17 3.14 Fire performance.17 3.15 Cable runs.18 3.16 Cable installation methods in relation to electromagnetic interference .19 3.17 Mechanical protection .19 3.18 Bending radius 20 3.19 Supports and fixing .21 3.20 Cables penetrating bulkheads and d
13、ecks.21 3.21 Installation in metallic pipes or conduits or trunking.22 3.22 Installation in non-metallic pipes, conduits, trunking, ducts or capping and casing .22 3.23 Installation in battery compartments 23 3.24 Installation in refrigeration spaces .23 3.25 Tensile stress23 3.26 Special precaution
14、s for single core cables for a.c. wiring.23 3.27 Cable ends24 3.28 Joints and tappings (branch circuits) .25 3.29 Joint boxes25 Annex A (informative) Tabulated current carrying capacities Defined installations29 Annex B (informative) Tabulated current carrying capacities General installations .40 An
15、nex C (informative) Fire stops47 Annex D (informative) Cable splicing .48 Bibliography49 60092-352 IEC:2005(E) 3 Figure 1 Correction factors for half hour and one hour service .26 Figure 2 Time constant of cables .27 Figure 3 Correction factor for intermittent service.28 Table 1 Choice of cables for
16、 a.c. systems11 Table 2 Sizes of earth continuity conductors aand equipment earthing connections .12 Table 3 Correction factor for various ambient air temperatures 14 Table 4 Bending Radii for cables rated up to 1,8/3 kV20 Table 4 A Bending Radii for cables rated at 3,6/6,0(7,2) kV and above 20 Tabl
17、e A.1 Current carrying capacities in amperes 32 Table A.2 Current carrying capacities in amperes 33 Table A.3 Current carrying capacities in amperes 34 Table A.4 Current carrying capacities in amperes 35 Table A.5 Current carrying capacities in amperes 36 Table A.6 Correction factors for groups of m
18、ore than one circuit or of more than one multi-core cable to be used with current carrying capacities of Tables A.1 to A.537 Table A.7 Correction factors for group of more than one multi-core cable to be applied to reference ratings for multi-core cables in free air Method of installation E in Table
19、s A.1 to A.5 38 Table A.8 Correction factors for groups of more than one circuit of single-core cables to be applied to reference rating for one circuit of single-core cables in free air Method of installation F in Tables A.1 to A.5 .39 Table B.1 Current carrying capacities in continuous service at
20、maximum rated conductor temperature of 60 C 42 Table B.2 Current carrying capacities in continuous service at maximum rated conductor temperature of 70 C 43 Table B.3 Current carrying capacities in continuous service at maximum rated conductor temperature of 85 C 44 Table B.4 Current carrying capaci
21、ties in continuous service at maximum rated conductor temperature of 90 C 45 Table B.5 Current carrying capacities in continuous service at maximum rated conductor temperature of 95 C 46 4 60092-352 IEC:2005(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICAL INSTALLATIONS IN SHIPS Part 352: C
22、hoice and installation of electrical cables FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
23、 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Public
24、ation(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IE
25、C collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of op
26、inion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to
27、 ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparent
28、ly to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rende
29、red responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of it
30、s technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any oth
31、er IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the
32、 subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60092-352 has been prepared by subcommittee 18A: Cables and cable installations, of IEC technical committee TC 18: Electrical installations of ships and of mobile an
33、d fixed offshore units. This third edition cancels and replaces the second edition published in 1997, of which it constitutes a technical revision. Main changes with respect to the second edition relate to: sizes of earth continuity conductors and equipment earthing connections; bending radii for ca
34、bles rated at 3,6/6,0 (7,2) kV and above; current carrying capacities in amperes at core temperatures of 70 C and 90 C; tabulated current carrying capacities defined installations. 60092-352 IEC:2005(E) 5 The text of this standard is based on the following documents: FDIS Report on voting 18A/277/FD
35、IS 18A/280/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60092 consists of the following parts under the general title El
36、ectrical installations in ships: Part 101: Definitions and general requirements Part 201: System design General Part 202: System design Protection Part 203: System design Acoustic and optical signals Part 204: System design Electric and electrohydraulic steering gear Part 301: Equipment Generators a
37、nd motors Part 302: Low-voltage switchgear and controlgear assemblies Part 303: Equipment Transformers for power and lighting Part 304: Equipment Semiconductor convertors Part 305: Equipment Accumulator (storage) batteries Part 306: Equipment Luminaires and accessories Part 307: Equipment Heating an
38、d cooking appliances Part 350: Shipboard power cables General construction and test requirements Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables Part 352: Choice and installation of electric cables Part 353: Single a
39、nd multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Part 359: Sheathing materials for shipboard power and
40、 telecommunication cables Part 373: Shipboard telecommunication cables and radio-frequency cables Shipboard flexible coaxial cables Part 374: Shipboard telecommunication cables and radio-frequency cables Telephone cables for non-essential communication services Part 375 Shipboard telecommunication c
41、ables and radio-frequency cables General instrumentation, control and communication cables Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) Part 401: Installation and test of completed installation Part 501: Special features Electric propulsion plant Part 502: Tankers Spec
42、ial features Part 503: Special features A.C. supply systems with voltages in the range above 1 kV up to and including 11 kV Part 504: Special features Control and instrumentation 6 60092-352 IEC:2005(E) Part 506: Special features Ships carrying specific dangerous goods and materials hazardous only i
43、n bulk Part 507: Pleasure craft The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be r
44、econfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 60092-352 IEC:2005(E) 7 INTRODUCTION IEC 60092 forms a series of International Standards concerning electrical installations in sea- going ships and fixed or mobil
45、e offshore units, incorporating good practice and co-ordinating as far as possible existing rules. These standards form: a code of practical interpretation and amplification of the requirements of the International Convention on Safety of Life at Sea; a guide for future regulations which may be prep
46、ared and a statement of practice for use by owners and builders of ships and fixed or mobile and offshore units and other appropriate organisations. This revision of IEC 60092-352 has been prepared by Maintenance Team 1 of IEC SC 18A, to update and include developments identified in other parts of t
47、he 60092 series of standards applicable to electric cables for electrical installations in ships, viz: the increase in maximum rated conductor temperature during normal operation for EPR, XLPE type insulations see IEC 60092-351 and the effect on current carrying capacities; the publication of IEC 60
48、092-376 covering cables for control and instrumentation 150/250V(300V); changes in test methods to demonstrate the capability of cables to continue to operate in fire conditions and to limit the spread of flame; the inclusion of a method for the determination of current carrying capacities based upo
49、n those that have been accepted and established in other applications of cable use. This method has been derived from a technical basis and allows a greater choice of use in different installation methods as opposed to that currently specified, which was established from experimental data on a limited number of cables and installation informatio
