1、 IEC 60254-2Edition 4.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALELead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells Batteries daccumulateurs de traction au plomb Partie 2: Dimensions des lments et des bornes et indication de la polarit su
2、r les lments IEC60254-2:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and mi
3、crofilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member
4、National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans lacco
5、rd crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence.
6、IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related te
7、chnologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalo
8、gue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice
9、a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional language
10、s. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22
11、919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI
12、Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet d
13、effectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just
14、Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais,
15、 ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, v
16、isitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60254-2Edition 4.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALELead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells Batteries
17、daccumulateurs de traction au plomb Partie 2: Dimensions des lments et des bornes et indication de la polarit sur les lments INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE LICS 29.220.20 PRICE CODECODE PRIXISBN 2-8318-9632-0 2 60254-2 IEC:2008 CONTENTS FOREWORD.
18、3 1 Scope and object5 2 Normative references .5 3 Main dimensions of traction battery cells 5 3.1 Standard series .5 3.2 External dimensions 5 3.3 Cell range prevalent in Asia.6 3.4 Cell range prevalent in North America .6 4 Marking of polarity on traction battery cells and dimensions of correspondi
19、ng symbols8 4.1 General provisions for marking of cell polarity .8 4.2 Form of marking 8 4.3 Symbols used for marking and their dimensions 8 5 Basic dimensions of traction battery terminals 9 5.1 General provisions for dimensions of battery terminals9 5.2 Conical traction battery terminals 9 5.3 Bol
20、ted traction battery terminals 9 Bibliography11 Figure 1 Basic dimensions of conical traction battery terminals9 Figure 2 Basic dimensions of traction battery cable ends for bolted terminals 10 Table 1 Main dimensions of traction battery cells .6 Table 2 Main dimensions of traction battery cells pre
21、valent in Asia 7 Table 3 Main dimensions of traction battery cells (vented) prevalent in North America.8 60254-2 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LEAD-ACID TRACTION BATTERIES Part 2: Dimensions of cells and terminals and marking of polarity on cells FOREWORD 1) The Internationa
22、l Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic f
23、ields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any
24、IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiz
25、ation (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represe
26、ntation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC c
27、annot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicat
28、ions. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IE
29、C Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injur
30、y, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references ci
31、ted in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identify
32、ing any or all such patent rights. International Standard IEC 60254-2 has been prepared by committee 21: Secondary cells and batteries This fourth edition cancels and replaces the third edition published in 1997 and its Amendment 1 (2000). It constitutes a technical revision. The main modification c
33、oncerns the introduction of new dimensions. The text of this standard is based on the following documents: FDIS Report on voting 21/668/FDIS 21/670/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication
34、 has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 60254-2 IEC:2008 A list of all parts of the IEC 60254 series, published under the general title Lead-acid traction batteries, can be found on the IEC website. The committee has decided that the contents of this publication will r
35、emain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60254-2 IEC:2008 5 LEAD-ACID TRACTIO
36、N BATTERIES Part 2: Dimensions of cells and terminals and marking of polarity on cells 1 Scope and object This part of IEC 60254 is applicable to lead-acid traction batteries used as power sources for electric propulsion. The object of the present standard is to specify: the maximum external (overal
37、l) dimensions of traction battery cells, that is, the width, the height and the length; the form of the marking of traction battery cell polarity and dimensions of corresponding symbols; the basic dimensions of some commonly used traction battery terminals designed to connect output cables to the ba
38、ttery; the dimensions of cells commonly used in Asia and North America. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
39、 document (including any amendments) applies. IEC 60417, Graphical symbols for use on equipment 3 Main dimensions of traction battery cells 3.1 Standard series Traction battery cells in accordance with this standard shall belong to one of the following two dimensional series determined by the width:
40、 E (narrow) L (wide) 3.2 External dimensions 3.2.1 The external (overall) dimensions of traction battery cells are represented by the following symbols: b width (dimension parallel to the surface of the plates); h height (including lid, vent plugs and terminals, but without output cable); l length (
41、dimension perpendicular to the surface of the plates). 3.2.2 The dimensions of traction battery cells in accordance with this standard shall correspond to those of Table 1. 6 60254-2 IEC:2008 Table 1 Main dimensions of traction battery cells Series Width b max. mm Type Height h max. mm Length series
42、 l max. mm A 300 47, 64, 79 B 370 95, 111 C 440 127, 145 E 160 D 510 160, 176 E 555 192, 208 G 750 B 370 47, 65 C 440 83, 101 D 510 119, 137 L 198 E 555 155, 174 F 605 192 G 750 3.3 Cell range prevalent in Asia For information, the dimensions of traction battery cells in this range are given in Tabl
43、e 2. NOTE For specific applications see the approprioate Japanese standard. 3.4 Cell range prevalent in North America For information, the dimensions of traction battery cells in this range are given in Table 3. Width and length only are specified. NOTE For specific applications see the appropriate
44、USA standard. 60254-2 IEC:2008 7 Table2 Maindimensionsoftractionbattery cellsprevalentinAsiaMax. external dimensions mmStandard dimensions mmTypeTotalheightBox heightWidth Length B 360 323 160 90 94 109 128 144 161 206 C 390 353 160 90 94 109 128 144 161 190 206 244 D 435 398 160 60 90 94 109 128 14
45、4 161 177 190 244 DH 450 413 160 144 161 177 206 F 530 493 160 60 75 90 109 128 144 177 190 225 I 560 523 160 60 75 90 109 128 144 161 190 206 225 244 H 740 703 160 60 75 90 94 109 128 144 8 60254-2 IEC:2008 Table 3 Main dimensions of traction battery cells (vented) prevalent in North America Cell f
46、ootprint Plates Narrow Wide in mm in mm 5 2,00 6,19 50,8 157,2 7 2,75 6,19 69,9 157,2 9 3,50 6,19 88,9 157,2 3,50 8,63 88,9 219,2 11 4,25 6,19 108,0 157,2 4,25 8,63 108,0 219,2 13 5,00 6,19 127,0 157,2 5,00 8,63 127,0 219,2 15 5,75 6,25 146,1 158,8 5,75 8,63 146,1 219,2 17 6,50 6,25 165,1 158,8 6,50
47、 8,63 165,1 219,2 19 7,25 6,25 184,2 158,8 7,25 8,63 184,2 219,2 21 8,00 6,25 203,2 158,8 8,00 8,63 203,2 219,2 23 8,75 6,25 222,3 158,8 25 9,50 6,25 241,3 158,8 27 10,25 6,25 260,4 158,8 29 11,00 6,25 279,4 158,8 31 11,75 6,25 298,5 158,8 33 12,50 6,25 317,5 158,8 4 Marking of polarity on traction
48、battery cells and dimensions of corresponding symbols 4.1 General provisions for marking of cell polarity To comply with this standard, traction battery cells shall carry the marking of polarity, at least of the positive terminal. 4.2 Form of marking The marking shall take the form of the symbol +, indented or in relief, on the lid adjacent to the positive terminal. If the negative terminal is also marked, the marking shall take the form of the symbol , indented or in relief, on the lid adjacent to the negative terminal. 4.3 Symbols used for marking and their dimensions Symbols u
