1、 IEC 60286-2 Edition 4.0 2015-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Packaging of components for automatic handling Part 2: Tape packaging of components with unidirectional leads on continuous tapes Emballage de composants pour oprations automatises Partie 2: Emballage des composants sorties
2、 unilatrales en bandes continues IEC 60286-2:2015-04(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical
3、, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
4、below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopi
5、e et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de v
6、otre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International S
7、tandards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webs
8、tore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub
9、The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Ju
10、st Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent te
11、rms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 20
12、02. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIE
13、C La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est con
14、stamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniqu
15、es, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle do
16、nne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email
17、. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique Internat
18、ional (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77,
19、86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60286-2 Edition 4.0 2015-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Packaging of components for automatic hand
20、ling Part 2: Tape packaging of components with unidirectional leads on continuous tapes Emballage de composants pour oprations automatises Partie 2: Emballage des composants sorties unilatrales en bandes continues INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE I
21、CS 31.020; 31.240 ISBN 978-2-8322-2595-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous
22、 avez obtenu cette publication via un distributeur agr. 2 IEC 60286-2:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references . 7 3 Terms, definitions and symbols 7 3.1 Terms and definitions 7 3.2 Symbols 10 4 Dimensions 13 4.1 Tape width dimensions (W, W 0 , W 1 , W 2 ) 13 4.1.1 Tape w
23、idth (W) 13 4.1.2 Hold-down tape width (W 0 ) 13 4.1.3 Distance between the upper edges of the carrier tape and the abscissa (W 1 ) 13 4.1.4 Distance between the upper edges of the carrier tape and the hold-down tape (W 2 ) 13 4.2 Components and sprocket hole pitches (P, P 0 , P 1 , P 2 , D 0 ) . 13
24、 4.2.1 General . 13 4.2.2 Pitch between two consecutive mutual components (P) 13 4.2.3 Pitch between two consecutive sprocket holes (P 0 ) 13 4.2.4 Distance between the ordinate and the first lead of the component on the drawer side (for components with two leads) (P 1 ) . 14 4.2.5 Distance between
25、the ordinate and the center lead of the component on the drawer side (for components with three leads) (P 2 ) 14 4.2.6 Sprocket hole diameter (D 0 ) 14 4.3 Dimensions for component position relative to the abscissa (H, H 0 , H 1 , H 2 , H 3 ) . 14 4.3.1 Distance between the abscissa and the bottom p
26、lane of the component body (H). 14 4.3.2 Distance between the abscissa and the reference plane of components with crimped leads (H 0 ) . 14 4.3.3 Distance between the abscissa and the top of the body of the components (H 1 ) . 14 4.3.4 Distance between the abscissa and the tip of the short terminal
27、without tape (H 2 ) . 14 4.3.5 Distance between the bottom of the component and the tip of the short terminal without tape (H 3 ) 14 4.4 Lead terminal dimensions (d, d 1 , F, F 1 , F 2 , L, K) and tape thickness (T, T 1 ) . 15 4.4.1 Dimensions and tolerances of lead spacing for two leaded components
28、 (F) and for three leaded components (F 1 , F 2 ) 15 4.4.2 Lead terminal diameter (d, d 1 ) . 15 4.4.3 Tape thickness (T, T 1 ) . 15 4.4.4 Maximum permissible protrusion of the ends of the leads (L) 15 4.4.5 Distance between the lead terminal and the short terminal without tape (K) . 15 4.5 Maximum
29、permissible deviation of taped component dimensions . 16 4.5.1 Maximum permissible deviation of taped component dimensions ( h, p, P 1 ) 16 5 Taping . 16 5.1 Taping dimensions 16 5.2 Splices 16 IEC 60286-2:2015 IEC 2015 3 5.3 Tape leader and trailer 17 6 Tape 17 6.1 Polarization direction on tape 17
30、 6.2 Kinks or bends on tape 17 6.3 Adhesion to tape and extraction force 17 6.4 Tape breaking force 18 6.5 Tape material 18 6.6 Hold-down tape . 18 6.7 Missing components 18 7 Packing . 19 7.1 General . 19 7.2 Reel dimensions 19 7.2.1 Component tape reeling . 20 7.2.2 Components protection 20 7.2.3
31、Reel filling 21 7.3 Maximum dimensions of the fan-fold container 21 7.4 Recycling 21 7.5 Marking . 21 Annex A (informative) Dimensions for two leads . 22 A.1 Dimensions for two formed leads, sprocket hole between parts 22 A.2 Dimensions for two formed leads, sprocket hole between leads . 24 A.3 Dime
32、nsions for two straight leads, sprocket hole between parts . 26 A.4 Dimensions for two straight leads, sprocket hole between leads 28 Annex B (informative) Dimensions for three leads . 30 B.1 Dimensions for three formed leads, sprocket hole between parts . 30 B.2 Dimensions for three formed leads, s
33、procket hole between leads . 32 Bibliography 34 Figure 1 Short terminal without tape . 8 Figure 2 Crimp . 8 Figure 3 Abscissa, ordinate, seating plane and reference plane 9 Figure 4 Symbol references of tape and taped components dimensions 11 Figure 5 Symbol references of reel dimensions . 12 Figure
34、 6 Symbol references of fan-fold container dimensions 12 Figure 7 Position of short terminal without tape . 16 Figure 8 Leader and trailer of tape 17 Figure 9 Pull strength from taping . 18 Figure 10 Missing components . 19 Figure 11 Reeling . 20 Figure A.1 Symbol references for two formed leads, sp
35、rocket hole between parts . 22 Figure A.2 Symbol references for two formed leads, sprocket hole between leads . 24 Figure A.3 Symbol references for two straight leads, sprocket hole between parts 26 Figure A.4 Symbol references for two straight leads, sprocket hole between leads 28 Figure B.1 Symbol
36、 references for three formed leads, sprocket hole between parts . 30 Figure B.2 Symbol references for three formed leads, sprocket hole between leads 32 4 IEC 60286-2:2015 IEC 2015 Table 1 List of symbols for tape and taped components 10 Table 2 List of symbols used for packing taped components . 12
37、 Table 3 Reel dimensions 20 Table 4 Maximum outer dimensions for a fan-fold arrangement 21 Table A.1 Dimensions for two formed leads, sprocket hole between parts . 23 Table A.2 Dimensions for two formed leads, sprocket hole between leads 25 Table A.3 Dimensions for two straight leads, sprocket hole
38、between parts 27 Table A.4 Dimensions for two straight leads, sprocket hole between leads 29 Table B.1 Dimensions for three formed leads, sprocket hole between parts 31 Table B.2 Dimensions for three formed leads, sprocket hole between leads 33 IEC 60286-2:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNI
39、CAL COMMISSION _ PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING Part 2: Tape packaging of components with unidirectional leads on continuous tapes FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical
40、committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Tech
41、nical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governme
42、ntal and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or
43、agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international
44、use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to pr
45、omote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly ind
46、icated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies.
47、6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property dam
48、age or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this pub
49、lication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60286-2 has been prepared by IEC technical committe
