1、 IEC 60335-2-29 Edition 5.0 2016-06 REDLINE VERSION Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers IEC 60335-2-29:2016-06 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reser
2、ved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If
3、you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00
4、CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical c
5、ontent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information
6、on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, t
7、echnical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Ele
8、ctropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glos
9、sary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre -
10、 webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60335-2-29 Edition 5.0 2016-06 REDLINE VERSION Household and similar electrical appliances Safety Part 2-29: Particular requirements fo
11、r battery chargers INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.200; 91.180 ISBN 978-2-8322-3473-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60335-2-29:2016 RLV I
12、EC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 6 1 Scope 7 2 Normative references. 8 3 Terms and definitions 8 4 General requirement 9 5 General conditions for the tests 9 6 Classification . 9 7 Marking and instructions 9 8 Protection against access to live parts . 11 9 Starting of motor-operated appl
13、iances 11 10 Power input and current . 11 11 Heating . 12 12 Void 12 13 Leakage current and electric strength at operating temperature 12 14 Transient overvoltages. 12 15 Moisture resistance . 12 16 Leakage current and electric strength . 12 17 Overload protection of transformers and associated circ
14、uits 12 18 Endurance . 12 19 Abnormal operation . 13 20 Stability and mechanical hazards . 13 21 Mechanical strength . 13 22 Construction 14 23 Internal wiring 15 24 Components 15 25 Supply connection and external flexible cords 15 26 Terminals for external conductors 15 27 Provision for earthing .
15、16 28 Screws and connections 16 29 Clearances, creepage distances and solid insulation 16 30 Resistance to heat and fire 16 31 Resistance to rusting . 16 32 Radiation, toxicity and similar hazards . 16 Annexes . 18 Annex A (informative) Routine tests . 18 Annex AA (normative) Battery chargers for us
16、e by children . 19 Bibliography . 23 Figure 101 Circuit for testing battery chargers 17 IEC 60335-2-29:2016 RLV IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-29: Particular requirements for battery chargers FOREWORD 1) The Internatio
17、nal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic
18、 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; an
19、y IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standar
20、dization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repr
21、esentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IE
22、C cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publi
23、cations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some area
24、s, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents includi
25、ng individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or relianc
26、e upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elem
27、ents of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user with an indication of what changes have been mad
28、e to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change
29、 has been made. Additions are in green text, deletions are in strikethrough red text. 4 IEC 60335-2-29:2016 RLV IEC 2016 This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This fifth edition cancels an
30、d replaces the fourth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2009). It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition of IEC 60335-2-29 are as follows (minor changes are not listed): Revised the dro
31、p test to refer to IEC 60068-2-31 (21.101); Requirements for supply cords on battery chargers used at low temperatures (25.7); Requirements for battery chargers having an output voltage exceeding SELV have been added (1, 3.2.2, 3.4.3, 10.101, 24.4, 25.5, 25.7, 25.8, 25.15. 26.5); A classification fo
32、r battery chargers used outdoors has been added (6.2, 29.2); Some notes in Clause 1, Subclauses 7.1 and 22.102, Figure 101 and Annex AA 11.8 have been converted to normative text. The text of this standard is based on the following documents: FDIS Report on voting 61/5142/FDIS 61/5173/RVD Full infor
33、mation on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amend
34、ments. It was established on the basis of the fifth edition (2010) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Sa
35、fety requirements for battery chargers. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The f
36、ollowing numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional
37、annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
38、 are also in bold. IEC 60335-2-29:2016 RLV IEC 2016 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publicati
39、on will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in w
40、hich to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the
41、date of publication. The following differences exist in the countries indicated below. 3.1.9: The artificial load may not be used (USA). 11.2: The appliance is not placed in a test corner (USA). 21.101: The drop test is carried out differently on outdoor direct plug-in battery chargers (USA). 21.102
42、: The test is different (USA). 22.26: Basic insulation is allowed between live parts and SELV circuits (USA). Annex AA, 11.8: Higher temperature rises are allowed (USA). Annex AA, Clause 17: Higher temperature rises are allowed (USA). Annex AA, 19.13: Higher temperature rises are allowed (USA). IMPO
43、RTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 6 IEC 60335-2-29:2016 RLV IEC 2016 INTRODUCTI
44、ON It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, therma
45、l, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. Th
46、is standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates fun
47、ctions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazar
48、ds dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product
49、family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-
