1、 IEC 60384-9 Edition 4.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Condensateurs fixes utiliss dans les quipements lectroniques Partie 9: Spcification intermdia
2、ire: Condensateurs fixes dilectrique en cramique, Classe 2 IEC 60384-9:2015-03(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means
3、, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, p
4、lease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniq
5、ue, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le C
6、omit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and
7、 publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publi
8、shed. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications sear
9、ch - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on al
10、l new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and
11、French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC pu
12、blications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre:
13、csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique de
14、s publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes international
15、es, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, text
16、e, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi u
17、ne fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire
18、 Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des pu
19、blications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60384-9 Edition 4.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors
20、 for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Condensateurs fixes utiliss dans les quipements lectroniques Partie 9: Spcification intermdiaire: Condensateurs fixes dilectrique en cramique, Classe 2 INTERNATIONAL ELECTROTECHNICAL COM
21、MISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.060.20 ISBN 978-2-8322-2284-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distrib
22、utor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60384-9:2015 IEC 2015 CONTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references 7 1.4 Information to be given in a detail specification . 7 1.4.1 General . 7 1
23、.4.2 Outline drawing and dimensions 8 1.4.3 Mounting . 8 1.4.4 Ratings and characteristics 8 1.4.5 Marking . 9 1.5 Terms and definitions 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Marking on the body 10 1.6.3 Marking of the packaging . 10 1.6.4 Additional marking . 10 2 Preferred ratings and characte
24、ristics . 10 2.1 Preferred characteristics . 10 2.2 Preferred values of ratings 10 2.2.1 Rated temperature . 10 2.2.2 Rated voltage (U R ) 10 2.2.3 Category voltage (U C ) . 11 2.2.4 Preferred values of nominal capacitance and associated tolerance values 11 2.2.5 Temperature characteristic of capaci
25、tance . 11 3 Quality assessment procedures . 12 3.1 Primary stage of manufacture . 12 3.2 Structurally similar components 12 3.3 Certified test records of released lots 12 3.4 Qualification approval . 12 3.4.1 General . 12 3.4.2 Qualification approval on the basis of the fixed sample size procedure
26、12 3.4.3 Tests . 13 3.5 Quality conformance inspection 18 3.5.1 Formation of inspection lots . 18 3.5.2 Test schedule 19 3.5.3 Delayed delivery 19 3.5.4 Assessment levels . 19 4 Test and measurement procedures 20 4.1 General . 20 4.2 Special preconditioning . 20 4.3 Visual examination and check of d
27、imensions 20 4.4 Electrical tests 20 4.4.1 Capacitance 20 4.4.2 Tangent of loss angle (tan ) . 21 IEC 60384-9:2015 IEC 2015 3 4.4.3 Insulation resistance (R i ) . 21 4.4.4 Voltage proof . 22 4.5 Temperature characteristic of capacitance 23 4.5.1 Special preconditioning 23 4.5.2 Measuring conditions
28、. 23 4.5.3 Requirements 23 4.6 Robustness of terminations . 23 4.7 Resistance to soldering heat . 23 4.7.1 General . 23 4.7.2 Special preconditioning 24 4.7.3 Initial measurement . 24 4.7.4 Recovery . 24 4.7.5 Final inspection, measurements and requirements. 24 4.8 Solderability 24 4.8.1 General . 2
29、4 4.8.2 Test conditions 24 4.8.3 Final inspection, measurements and requirements. 24 4.9 Rapid change of temperature (if required) . 24 4.9.1 General . 24 4.9.2 Special preconditioning 24 4.9.3 Initial measurement . 25 4.9.4 Test conditions 25 4.9.5 Recovery . 25 4.10 Vibration . 25 4.10.1 General .
30、 25 4.10.2 Test conditions 25 4.10.3 Final inspection, measurements and requirements. 25 4.11 Bump (repetitive shock) 25 4.11.1 General . 25 4.11.2 Initial measurements . 25 4.11.3 Test conditions 25 4.11.4 Final inspection, measurements and requirements. 26 4.12 Shock (non-repetitive shock) . 26 4.
31、12.1 General . 26 4.12.2 Initial measurements . 26 4.12.3 Test conditions 26 4.12.4 Final inspection, measurements and requirements. 26 4.13 Climatic sequence. 27 4.13.1 General . 27 4.13.2 Special preconditioning 27 4.13.3 Initial measurements . 27 4.13.4 Dry heat 27 4.13.5 Damp heat, cyclic, Test
32、Db, first cycle . 27 4.13.6 Cold. 27 4.13.7 Low air pressure 27 4.13.8 Damp heat, cyclic, Test Db, remaining cycles 28 4.14 Damp heat, steady state . 28 4.14.1 General . 28 4.14.2 Special preconditioning 28 4 IEC 60384-9:2015 IEC 2015 4.14.3 Initial measurement . 29 4.14.4 Test conditions 29 4.14.5
33、Recovery . 29 4.14.6 Final inspection, measurements and requirements. 29 4.15 Endurance 30 4.15.1 General . 30 4.15.2 Special preconditioning 30 4.15.3 Initial measurement . 30 4.15.4 Test conditions 30 4.15.5 Recovery . 30 4.15.6 Final inspection, measurements and requirements. 30 4.16 Component so
34、lvent resistance (if applicable) 31 4.17 Solvent resistance of the marking (if applicable) . 31 Annex A (informative) Capacitance ageing of fixed capacitors of ceramic dielectric, Class 2 32 A.1 General . 32 A.2 Law of capacitance ageing 32 A.3 Capacitance measurements and capacitance tolerance (see
35、 4.4.1). 33 A.4 Special preconditioning (see 4.2) 33 Bibliography 35 Table 1 Preferred tolerance on nominal capacitance 11 Table 2 Preferred values of temperature characteristics . 11 Table 3 Sampling plan together with numbers of permissible non-conforming items for qualification approval tests, as
36、sessment level EZ 14 Table 4 Test schedule for qualification approval 15 Table 5 Lot-by-lot inspection 19 Table 6 Periodic tests 20 Table 7 Measuring conditions 21 Table 8 Insulation resistance requirements 22 Table 9 Test voltages . 22 Table 10 Details of measuring conditions . 23 Table 11 Maximum
37、capacitance change . 24 Table 12 Preferred severities (of non-repetitive shock) 26 Table 13 Maximum capacitance change . 27 Table 14 Number of damp heat cycles . 28 Table 15 Final inspection measurements and requirements . 28 Table 16 Test conditions for damp heat, steady state . 29 Table 17 Final i
38、nspection, measurements and requirements 29 Table 18 Endurance test conditions . 30 Table 19 Final inspection, measurements and requirements 30 IEC 60384-9:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 9: Sectional specification: Fi
39、xed capacitors of ceramic dielectric, Class 2 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on a
40、ll questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publ
41、ication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation.
42、IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
43、opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made
44、to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transpare
45、ntly to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certi
46、fication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sha
47、ll attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including leg
48、al fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pub
49、lication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-9 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This fourth edition cancels and replaces the third edi
