IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf

上传人:lawfemale396 文档编号:1234832 上传时间:2019-08-24 格式:PDF 页数:22 大小:942.85KB
下载 相关 举报
IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf_第1页
第1页 / 共22页
IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf_第2页
第2页 / 共22页
IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf_第3页
第3页 / 共22页
IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf_第4页
第4页 / 共22页
IEC 60598-2-24-2013 Luminaires - Part 2-24 Particular requirements - Luminaires with limited surface temperatures《灯具 第2-24部分 特殊要求 限制表面温度的灯具》.pdf_第5页
第5页 / 共22页
点击查看更多>>
资源描述

1、 IEC 60598-2-24 Edition 2.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures Luminaires Partie 2-24: Exigences particulires Luminaires avec surfaces tempratures limites IEC60598-2-24:2013 THIS PUBLICATION I

2、S COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from eit

3、her IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Dro

4、its de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CE

5、I du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, ru

6、e de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Abou

7、t IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables y

8、ou to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all

9、new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional langua

10、ges. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission E

11、lectrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment re

12、vu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, tex

13、te, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et

14、aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement

15、appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60598-2-24 Edition 2.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIO

16、NALE Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures Luminaires Partie 2-24: Exigences particulires Luminaires avec surfaces tempratures limites INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS 29.140.40 PRICE CODE

17、CODE PRIX ISBN 978-2-83220-867-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez ob

18、tenu cette publication via un distributeur agr. 2 60598-2-24 IEC:2013 CONTENTS FOREWORD . 3 24.1 Scope 5 24.2 Normative references 5 24.3 General test requirements 5 24.4 Terms and definitions 5 24.5 Classification of luminaires 6 24.6 Marking . 6 24.7 Construction 6 24.8 Creepage distances and clea

19、rances . 7 24.9 Provision for earthing . 7 24.10 Terminals and electrical connections 7 24.11 External and internal wiring 7 24.12 Protection against electric shock 7 24.13 Endurance test and thermal test. 7 24.13.1 Temperature limits normal operation . 7 24.13.2 Temperature limits abnormal operatio

20、n . 8 24.13.3 Temperature limits fault conditions . 8 24.14 Resistance to dust, solid objects and moisture . 8 24.15 Insulation resistance and electric strength 8 24.16 Resistance to heat, fire and tracking 8 Figure 1 Symbol for luminaires with limited surface temperatures . 6 60598-2-24 IEC:2013 3

21、INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LUMINAIRES Part 2-24: Particular requirements Luminaires with limited surface temperatures FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (

22、IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Report

23、s, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non

24、-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of

25、 IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are a

26、ccepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote interna

27、tional uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the

28、 latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users

29、should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other

30、damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use

31、 of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent r

32、ights. International Standard IEC 60598-2-24 has been prepared by subcommittee 34D: Luminaires, of IEC technical committee 34: Lamps and related equipment. This publication is intended to be read in conjunction with IEC 60598-1: Luminaires Part 1: General requirements and tests. This second edition

33、cancels and replaces the first edition published in 1997. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) change of required degree of protection from IP6X to IP4X to harmonize with the international wiri

34、ng rules; b) temperature limits introduced for glass surface of any light source exposed to risk of dust. 4 60598-2-24 IEC:2013 The text of this standard is based on the following documents: FDIS Report on voting 34D/1094/FDIS 34D/1100/RVD Full information on the voting for the approval of this stan

35、dard can be found in the report on voting indicated in the above table. A list of all the parts in the IEC 60598 series, published under the general title Luminaires can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard

36、, the following print types are used: requirements: roman type. test specifications: italic type. notes: smaller roman type. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in t

37、he data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60598-2-24 IEC:2013 5 LUMINAIRES Part 2-24: Particular requirements Luminaires with limited surface temperatures 24.1 Scope This part of the IEC 60598

38、 series specifies requirements for luminaires intended for use where the necessity of limited temperature on the outer surface exists, due to the risk of thermal effects, combustion or degradation of materials but where the risk of explosion in the atmosphere does not exist. The luminaires are for u

39、se with electric light sources on supply voltages not exceeding 1 000 V. This standard specifically excludes requirements for luminaires for use in explosive gas atmospheres and explosive dust atmospheres. 24.2 Normative references The following documents, in whole or in part, are normatively refere

40、nced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60364-4-42, Low-voltage electrical installations Part 4-42: Protection

41、for safety Protection against thermal effects IEC 60598-1, Luminaires Part 1: General requirements and tests ISO 4225:1994, Air quality General aspects Vocabulary 24.3 General test requirements The provisions of Section 0 in IEC 60598-1 apply. The tests described in each appropriate section of IEC 6

42、0598-1 shall be carried out in the order listed in this standard. 24.4 Terms and definitions For the purposes of this document, the terms and definitions given in Section 1 of IEC 60598-1 apply, as well as the following apply. 24.4.1 dust small solid particles in the atmosphere which settle out unde

43、r their own weight, but which may remain suspended in air for some time (includes dust and grit as defined in ISO 4225) 24.4.2 explosive gas atmosphere mixture with air, under atmospheric conditions, of flammable substances in the form of gas or vapour which, after ignition, permits self sustaining

44、flame propagation SOURCE: IEC 60050-426:2008, 426-01-07 6 60598-2-24 IEC:2013 24.4.3 explosive dust atmosphere a mixture with air, under atmospheric conditions, of flammable substances in the form of dust, fibres or flyings which, after ignition, permits self-sustaining propagation SOURCE: IEC 60050

45、-426:2008, 426-01-08 24.5 Classification of luminaires Luminaires shall be classified in accordance with the provisions of Section 2 of IEC 60598-1. Additionally luminaires complying with this section are classified suitable for use in locations specified in IEC 60364-4-42 as follows. a) For use in

46、environments where no unusual accumulation of dust is expected. b) For use in environments where an accumulation of non-conductive dust on the luminaire may be expected. c) For use in environments where an accumulation of conductive dust on the luminaire may be expected. 24.6 Marking The provisions

47、of Section 3 of IEC 60598-1 apply together with the following requirements. 24.6.1 Luminaires shall be marked with the symbol (see Figure 1). This marking shall be visible and meet the requirements of 3.2 c) of IEC 60598-1. Figure 1 Symbol for luminaires with limited surface temperatures 24.6.2 From

48、 the manufacturers literature it shall be evident to which location the luminaire is intended in accordance with the luminaires classification as given in 24.5 of this standard. 24.7 Construction The provisions of Section 4 of IEC 60598-1 apply, together with the requirements of 24.7.1 and 24.7.2 be

49、low. 24.7.1 Luminaires shall be provided with an enclosure providing a degree of protection of at least IP4X or in the presence of dust, IP5X or in the presence of conductive dust, IP6X. For certain locations the international wiring rules may require at least IP5X or IP6X (see IEC 60364-4-42). Compliance is checked by inspection. D D 60598-2-24 IEC:2013 7 24.7.2 Surfaces where dust may accumulate a

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1