1、 IEC 60811-513 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 513: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after conditioning Cbles lectriques et fibres
2、 optiques Mthodes dessai pour les matriaux non-mtalliques Partie 513: Essais mcaniques Mthodes spcifiques pour les mlanges polythylne et polypropylne Essai denroulement aprs conditionnement IEC60811-513:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights r
3、eserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester.
4、 If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de ce
5、tte publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la
6、CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland
7、 www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under
8、 constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, te
9、xt, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by emai
10、l. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-
11、line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale
12、qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corr
13、igendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et l
14、es publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le
15、premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service C
16、lients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60811-513 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materi
17、als Part 513: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after conditioning Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux non-mtalliques Partie 513: Essais mcaniques Mthodes spcifiques pour les mlanges polythylne et polypropylne
18、 Essai denroulement aprs conditionnement INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-992-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele
19、ctrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60811-513 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 6 2 Normative references . 6 3 Term
20、s and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Conditioning procedure . 6 4.3 Test procedure 7 4.4 Evaluation of results 7 5 Test report 7 Bibliography 8 60811-513 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATE
21、RIALS Part 513: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after conditioning FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nati
22、onal Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publi
23、cly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governm
24、ental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on
25、technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted
26、by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international u
27、niformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
28、 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should e
29、nsure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage o
30、f any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the
31、referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. I
32、nternational Standard IEC 60811-513 has been prepared by IEC technical committee 20: Electric cables. This Part 513 of IEC 60811 cancels and replaces Clause 9 of IEC 60811-4-2:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100: 2012. There are no specifi
33、c technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100: 2012. 4 60811-513 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 20/1309/FDIS 20/1358/RVD Full information on the voting for the approval of this standard c
34、an be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part of IEC 60811 shall be used in conjunction with IEC 60811-100. A list of all the parts in the IEC 60811 series, published under the general
35、title Electric and optical fibre cables Test methods for non-metallic materials, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data rel
36、ated to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60811-513 IEC:2012 5 INTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These tes
37、t methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been dev
38、eloped and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore applications. 6 60811-513 IEC:2012 ELECTRIC AND OP
39、TICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 513: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after conditioning 1 Scope This Part 513 of IEC 60811 gives procedures for a wrapping test after conditioning at elevated temperature. This
40、 test method applies specifically to polyethylene and polypropylene insulation. This test is intended for samples from filled cables of polyolefin insulation having a wall thickness of less than or equal to 0,8 mm. 2 Normative references The following documents, in whole or in part, are normatively
41、referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods fo
42、r non-metallic materials Part 100: General 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. For multicore cables and cords, not more tha
43、n three cores (of different colours, if any) shall be tested, unless otherwise specified in the relevant cable standard. All the tests shall be carried out not less than 16 h after the extrusion or cross-linking, if any, of the compounds used for insulating or sheathing. 4.2 Conditioning procedure A
44、 sample of complete cable of sufficient length shall be conditioned in air (i.e. suspended in an oven). The duration of the test and temperature of the air maintained continuously shall be as follows: 7 24 h at (60 2) C for filling compound having a nominal drop point above 50 C and up to and includ
45、ing 70 C; 7 24 h at (70 2) C for filling compound having a nominal drop point above 70 C. 60811-513 IEC:2012 7 NOTE For an explanation of the drop point, see IEC 60811-601. After conditioning, the cable sample shall be left at ambient temperature for at least 16 h without being exposed to direct sun
46、light. The sheath and cores to be tested shall then be taken from the cable and shall be cleaned by suitable means. 4.3 Test procedure Test pieces according to 4.2 shall be subjected to the following wrapping test: The conductor shall be laid bare at one end. A weight shall be applied to the exposed
47、 conductor end, exerting a pull of 15 N/mm2 20 % with respect to the conductor cross-section. Ten windings shall be made on the other end of the test piece by means of a winding device on a metal mandrel, preferably mechanically driven, at a speed of about 1 revolution per 5 s. The winding diameter
48、shall be 1 to 1,5 times the test piece diameter. Subsequently, the test pieces wound on the mandrel shall be removed from the latter and shall be kept in their helical form for 24 h at (70 2) C in a vertical position, substantially in the middle of an electrically heated cabinet having natural air f
49、low. For cellular insulations, including foam skin, having a wall thickness below or equal to 0,2 mm, the pull exerted on the exposed conductor shall be reduced to about 7,5 N/mm2 20 % with respect to the conductor cross-section. 4.4 Evaluation of results After cooling down to ambient temperature, the test pieces shall show no cracks when examined with nor
