IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf

上传人:syndromehi216 文档编号:1235500 上传时间:2019-08-24 格式:PDF 页数:54 大小:2MB
下载 相关 举报
IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf_第1页
第1页 / 共54页
IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf_第2页
第2页 / 共54页
IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf_第3页
第3页 / 共54页
IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf_第4页
第4页 / 共54页
IEC 60884-2-4-2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 Particular requirements for plugs and socket-outlets for SELV《家用和类似用途的插头插座.第2-4部分 安全特低电压(SELV)用插头插座的特殊要求》.pdf_第5页
第5页 / 共54页
点击查看更多>>
资源描述

1、 IEC 60884-2-4 Edition 3.0 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets for SELV Prises de courant pour usages domestiques et analogues Partie 2-4: Rgles particulires pou

2、r prises de courant pour TBTS IEC 60884-2-4:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including

3、 photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or yo

4、ur local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les mi

5、crofilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votr

6、e pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, elect

7、ronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub Th

8、e IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Publ

9、ished details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in

10、 additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csc

11、iec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos d

12、es publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de

13、la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publicati

14、ons de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en an

15、glais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous a

16、vez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60884-2-4 Edition 3.0 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirem

17、ents for plugs and socket-outlets for SELV Prises de courant pour usages domestiques et analogues Partie 2-4: Rgles particulires pour prises de courant pour TBTS INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 29.120.30 PRICE CODE CODE PRIX ISBN 2-8318-9359

18、-3 2 60884-2-4 IEC:2007 CONTENTS FOREWORD.4 1 Scope.7 2 Normative references7 3 Definitions 8 4 General requirements .8 5 General remarks on tests8 6 Ratings.8 7 Classification9 8 Marking 9 9 Checking of dimensions10 10 Protection against electric shock.10 11 Provision for earthing11 12 Terminals an

19、d terminations.11 13 Construction of fixed socket-outlets 12 14 Construction of plugs and portable socket-outlets12 15 Interlocked socket-outlets .13 16 Resistance to ageing, protection provided by the enclosures, and resistance to humidity13 17 Insulation resistance and electric strength.13 18 Oper

20、ation of earthing contacts 13 19 Temperature rise 13 20 Breaking capacity .13 21 Normal operation 14 22 Force necessary to withdraw the plug15 23 Flexible cables and their connection16 24 Mechanical strength17 25 Resistance to heat17 26 Screws, current-carrying parts and connections 18 27 Creepage d

21、istances, clearances and distances through sealing compound18 28 Resistance of insulating material to abnormal heat, to fire and to tracking .19 29 Resistance to rusting 20 30 Additional tests on pins provided with insulating sleeves20 Annex A (normative) Safety-related routine tests for factory-wir

22、ed portable accessories (protection against electric shock and correct polarity).23 Annex B (normative) Survey of specimens needed for tests24 Figure 101 Gauge for the verification of the maximum withdrawal force 21 Figure 102 Gauge for the verification of the minimum withdrawal force .22 60884-2-4

23、IEC:2007 3 Table 1 Ratings9 Table 3 Relationship between rated current and connectable nominal cross-sectional areas of copper conductors .11 Table 11 Nominal cross-sectional areas of rigid copper conductors for the deflection test of screwless terminals 11 Table 16 Maximum and minimum withdrawal fo

24、rces16 Table 17 External dimensions of flexible cables to be accommodated by cord anchorages.16 Table 18 Torque test values for cord anchorages16 Table 19 Maximum dimensions of flexible cables to be accommodated in rewirable accessories.17 Table 20 Relationship between rating of accessories, nominal

25、 cross-sectional areas of test conductors and test currents for the tests of temperature rise (Clause 19) and normal operation (Clause 21) 17 Table 23 Creepage distances and clearances.19 Table A.1 Diagrammatic representation of routine tests to be applied to factory-wired portable accessories .23 T

26、able B.101 Number of specimens required for the tests 24 4 60884-2-4 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2-4: Particular requirements for plugs and socket-outlets for SELV FOREWORD 1) The International Electrotechnical

27、 Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end

28、 and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Commi

29、ttee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in ac

30、cordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all

31、interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held res

32、ponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diverge

33、nce between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6)

34、 All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damag

35、e or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publi

36、cation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all su

37、ch patent rights. International Standard IEC 60884-2-4 has been prepared by subcommittee 23B: Plugs, socket- outlets and switches, of IEC technical committee 23: Electrical accessories. This third edition cancels and replaces the second edition published in 1999. It constitutes a technical revision.

38、 The main changes from the previous edition are as follows: Clause 7 Classification: deletion of classification according to the degree of protection against harmful ingress of water; inapplicability of 7.1.3 of Part 1 concerning classification according to the provision for earthing: inapplicabilit

39、y of 7.2.2 of Part 1 concerning classification according to the existence of shutters. 60884-2-4 IEC:2007 5 Clause 8 Marking: modification of the symbol for degree of protection to IPXX (Subclause 8.2). Clause 9 Checking of dimensions: addition of compliance paragraph in 9.1. Clause 13 Construction

40、of fixed socket-outlets: applicability of 13.14 of Part 1; addition of requirement about multiple socket-outlets (Subclause 13.101). Clause 14 Construction of plugs and portable socket-outlets: modification of compliance paragraph of 14.23; addition of requirement about minimum nominal cross-section

41、al area of cables for cord extension sets (Subclause 14.101). Clause 16 Resistance to ageing, protection provided by the enclosures, and resistance to humidity: applicability of the whole Clause of Part 1. Clause 21 Normal operation: addition of maximum specified dimensions, including tolerance, of

42、the test plug. Figures: new figures for gauges for the verification of maximum and minimum withdrawal force. Annexes: deletion of informative Annex AA and inclusion of the relevant information in normative Annex B. The text of this standard is based on the following documents: CDV Report on voting 2

43、3B/836/CDV 23B/858/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This Part 2-4 is intended to be used in conjunction with IEC

44、 60884-1 and IEC 60906-3. It was established on the basis of the third edition of IEC 60884-1 (2002) and of its Amendment 1 (2006). This Part 2-4 supplements or modifies the corresponding clauses in IEC 60884-1, so as to convert that publication into the IEC standard: Particular requirements for plu

45、gs and socket- outlets for SELV. When a particular subclause of Part 1 is mentioned in this Part 2-4, that subclause applies as far as reasonable. Where this standard states “addition”, “modification” or “replacement”, the relevant text of Part 1 is to be adapted accordingly. 6 60884-2-4 IEC:2007 In

46、 this standard the following print types are used: requirements proper: in roman type; test specification: in italic type; explanatory notes: in small roman type. Subclauses or figures which are additional to those in Part 1 are numbered starting from 101; supplementary annexes are entitled AA, BB,

47、etc. When clauses of Part 1 are declared as applicable, they apply only where they contain requirements concerning plugs and socket-outlets for SELV. A list of all parts of the IEC 60884 series, under the general title: Plugs and socket-outlets for household and similar purposes, can be found on the

48、 IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdr

49、awn, replaced by a revised edition, or amended. 60884-2-4 IEC:2007 7 PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2-4: Particular requirements for plugs and socket-outlets for SELV 1 Scope Replacement: This Part 2-4 of IEC 60884 applies to plugs, fixed or portable socket-outlets, and to socket- outlets for appliances from 6 V up to and includi

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1