1、 IEC 60966-3 Edition 3.0 2008-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies Cordons coaxiaux et cordons pour frquences radiolectriques Partie 3: Spcification intermdiaire relative
2、 aux cordons coaxiaux semi-flexibles IEC 60966-3:2008-10(EN-FR) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electr
3、onic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please co
4、ntact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y co
5、mpris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit nat
6、ional de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publish
7、es International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IE
8、C Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www
9、.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IE
10、C publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French,
11、with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publicatio
12、ns issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.c
13、h. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des public
14、ations IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spci
15、fications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit
16、 dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois
17、par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electro
18、technique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publicatio
19、ns des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60966-3 Edition 3.0 2008-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio frequency and coax
20、ial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies Cordons coaxiaux et cordons pour frquences radiolectriques Partie 3: Spcification intermdiaire relative aux cordons coaxiaux semi-flexibles INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECH
21、NIQUE INTERNATIONALE R ICS 33.120.10 PRICE CODE CODE PRIX ISBN 978-2-8322-1357-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. A
22、ttention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 60966-3 IEC:2008 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Design and manufacturing requirements . 6 4.1 Cable design and construction. 6 4
23、.2 Connector design and construction 6 4.3 Outline and interface dimensions. 6 5 Workmanship, marking and packaging 7 6 Quality assessment 8 7 Test methods General . 8 8 Electrical tests 8 9 Mechanical robustness tests . 9 10 Environmental tests 9 11 Specialized test methods 11 12 Test schedules . 1
24、1 Figure 1 Length definition of cable assemblies . 7 Figure 2 Example of a cable assembly . 7 Figure 3 Preferred arrangement for the vibration test . 10 Figure 4 Example production flow chart for a flexible cable assembly 14 Table 1 Grouping of tests for specification purposes 12 Table 2 Test schedu
25、le 13 Table 3 Assignment of CQCs . 15 60966-3 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 3: Sectional specification for semi-flexible coaxial cable assemblies FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide
26、organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activit
27、ies, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject de
28、alt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determin
29、ed by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committee
30、s. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which the
31、y are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication a
32、nd the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that the
33、y have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature w
34、hatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced pub
35、lications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International S
36、tandard IEC 60966-3 has been prepared by IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This bilingual version (2014-01) corresponds to the monolingual English version, published in 2008-10. This third edition cancels an
37、d replaces the second edition published in 2003. It constitutes a technical revision. The major change with respect to the second edition is a better definition of the tests to be performed. This sectional specification is to be read in conjunction with the second edition of IEC 60966-1 (1999). It c
38、ontains the same clauses as that of IEC 60966-1 and completes or amends them when required. When a clause of IEC 60966-1 does not appear in this standard, 4 60966-3 IEC:2008 it applies as it is in IEC 60966-1. When this standard states “addition“, “modification“ or “replacement“, the relevant text i
39、n Part 1 is to be adapted accordingly. The text of this standard is based on the following documents: CDV Report on voting 46/264/CDV 46/297/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of t
40、his standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60966 series, under the general title: Radio frequency and coaxial cable assemblies, can be found on the IEC website. The committee has decided th
41、at the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or ame
42、nded. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 60966-3 IEC:2008 5 RADIO FREQUENCY AND C
43、OAXIAL CABLE ASSEMBLIES Part 3: Sectional specification for semi-flexible coaxial cable assemblies 1 Scope This part of IEC 60966 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform require
44、ments for testing the electrical, mechanical and climatic properties of flexible cable assemblies composed of flexible coaxial cables and coaxial connectors. NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to
45、the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification should be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests. 2 Normative
46、 references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-6, Environmental testing
47、Part 2-6: Tests Test Fc: Vibration (sinusoidal) IEC 60096-2, Radio-frequency cables Part 2: Relevant cable specifications IEC 60410, Sampling plans and procedures for inspection by attributes IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic specification General require
48、ments and test methods IEC 61169 (all parts), Radio-frequency connectors IEC 61196 (all parts), Coaxial communication cables IEC QC 001002 (all parts), IEC Quality Assessment System for Electronic Components (IECQ) Rules of procedure ISO 9000, Quality management systems Fundamentals and vocabulary 3
49、 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60966-1 apply. 6 60966-3 IEC:2008 4 Design and manufacturing requirements Clause 4 of IEC 60966-1 is applicable except as follows. Replacement: 4.1 Cable design and construction Cables should conform to IEC 60096-2 or IEC 61196. Where cable designs deviating from these publications are required, they shall c
