1、 IEC 61169-19 Edition 1.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 19: Sectional specification Radio frequency coaxial connectors of type SSMB Connecteurs pour frquences radiolectriques Partie 19: Spcification intermdiaire Connecteurs coaxiaux pour frquence
2、s radiolectriques de type SSMB IEC61169-19:2011 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical
3、, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
4、below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopi
5、e et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la
6、CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electr
7、ical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/s
8、earchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications
9、. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivale
10、nt terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us:
11、 Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes.
12、 A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue e
13、n-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelle
14、s publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfini
15、tions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication o
16、u si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61169-19 Edition 1.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 19: Sectional specification Radio frequency coa
17、xial connectors of type SSMB Connecteurs pour frquences radiolectriques Partie 19: Spcification intermdiaire Connecteurs coaxiaux pour frquences radiolectriques de type SSMB INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 33.120.30 PRICE CODE CODE PRIX ISBN
18、 978-2-88912-320-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colourinside 2 61169-19 IEC:2011 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 Mating face and gauge information . 6 3.1 Dimensions
19、General purpose connectors Grade 2 . 6 3.1.1 Connector with socket-centre contact 6 3.1.2 Connector with pin-centre contact 8 3.2 Gauges . 9 3.2.1 Gauge pins for socket-centre contact . 9 3.2.2 Test procedure 9 3.2.3 Gauge for outer contact of socket-centre contact . 10 3.2.4 Test procedure 10 3.3 D
20、imensions Standard test connectors Grade 0 11 3.3.1 Connector with socket-centre contact 11 3.3.2 Connector with pin-centre contact 12 4 Quality assessment procedure 13 4.1 General . 13 4.2 Rating and characteristics (see Clause 6 of IEC 61169-1) . 13 4.3 Test schedule and inspection requirements Ac
21、ceptance tests . 15 4.3.1 Acceptance tests . 15 4.3.2 Periodic tests 16 4.4 Procedures 18 4.4.1 Quality conformance inspection . 18 4.4.2 Qualification approval and its maintenance 18 5 Instructions for preparation of detail specifications . 18 5.1 General . 18 5.2 Identification of the component 18
22、 5.3 Performance 19 5.4 Marking, ordering information and related matters . 19 5.5 Selection of tests, test conditions and severities 19 5.6 Blank detail specification pro-forma for type SSMB connector . 20 Figure 1 Connector with socket-centre contact (for dimensions and notes, see Table 1) . 7 Fig
23、ure 2 Connector with pin-centre contact (for dimensions and notes, see Table 2) . 8 Figure 3 Gauge pins for socket-centre contact (for dimensions and notes, see Table 3) 9 Figure 4 Outer contact sizing and retention force gauges A and B (for dimensions and notes, see Table 4) 10 Figure 5 Connector w
24、ith socket-centre contact (for dimensions and notes, see Table 5) . 11 Figure 6 Connector with pin-centre contact (for dimensions and notes, see Table 6) . 12 Table 1 Dimensions of connector with socket-centre contact 7 Table 2 Dimensions of connector with pin-centre contact . 8 Table 3 Dimensions o
25、f gauge pins for socket-centre contact 9 Table 4 Dimensions of gauge for outer contact 10 Table 5 Dimensions of connector with socket-centre contact 11 61169-19 IEC:2011 3 Table 6 Dimensions of connector with pin-centre contact . 12 Table 7 Rating and characteristics . 13 Table 8 Acceptance tests .
26、15 Table 9 Periodic tests 16 4 61169-19 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 19: Sectional specification Radio frequency coaxial connectors of type SSMB FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for sta
27、ndardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes I
28、nternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may partici
29、pate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betwe
30、en the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publication
31、s have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
32、 misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding
33、national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any servi
34、ces carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nati
35、onal Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention i
36、s drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shal
37、l not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-19 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components
38、and accessories. This first edition cancels and replaces IEC/PAS 61169-19, published in 2009, of which it constitutes a minor revision. The only change is that the PAS has been changed into and International Standard. The text of this standard is based on the following documents: CDV Report on votin
39、g 46F/138/CDV 46F/163/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 61169-19 IEC:2011 5 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169
40、series, published under the general title Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the
41、 specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding
42、of its contents. Users should therefore print this publication using a colour printer. 6 61169-19 IEC:2011 RADIO-FREQUENCY CONNECTORS Part 19: Sectional specification Radio frequency coaxial connectors of type SSMB 1 Scope The SSMB series connectors with characteristic impedance 50 are one kind of l
43、ow power miniature connectors with snap-on coupling mechanism and have the characteristics of light weight, small size, convenient connection and excellent characteristics. This connector range is suitable for the standard ranges of flexible and semi-rigid cables and is also available as a PCB mount
44、ed version. The connectors are usable up to a frequency of 3 GHz. This sectional specification provides information and rules for preparation of detail specification of SSMB series R.F connectors together with the pro forma blank detail specification. It also prescribes mating face dimensions for gr
45、ade 2 general purpose connectors, dimensional detail of grade 0 standard test connectors, gauging information and tests selected from IEC 61169-1 applicable to all detail specifications relating to SSMB series RF connectors. This specification indicates recommended performance characteristics to be
46、considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applie
47、s. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods1Amendment 1 (1996) Amendment 2 (1997) 3 Mating face and gauge information
48、 3.1 Dimensions General purpose connectors Grade 2 3.1.1 Connector with socket-centre contact All non-dimensioned pictorial configurations are for reference purpose only. _ 1There exists a consolidated edition 1.2 (1998) that comprises IEC 61169-1:1992, its Amendment 1:1996 and its Amendment 2:1997.
49、 61169-19 IEC:2011 7 Note 1 Note 4 Note 3 j i h f e d cgab (Note 2)IEC 058/11 Figure 1 Connector with socket-centre contact (for dimensions and notes, see Table 1) Table 1 Dimensions of connector with socket-centre contact Ref. mm Min. Max. a 2,74 - b - c - 1,34 d - 1,78 e 0,84 - f 0,84 - g 2,11 (nominal) h 3,10 - i 0,00 - j 2,77 - NOTE 1 Referen
