1、 IEC 61314-1-1 Edition 3.0 2011-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1-1: Blank detail specification Dispositifs dinterconnexion et composants passifs fibres optiques Systmes dclatement pour fibres optique
2、s Partie 1-1: Spcification particulire cadre IEC 61314-1-1:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechan
3、ical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the addr
4、ess below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photo
5、copie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de
6、 la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all el
7、ectrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.
8、ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publicat
9、ions. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equi
10、valent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact
11、 us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparen
12、tes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalog
13、ue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouv
14、elles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et d
15、finitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publicati
16、on ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61314-1-1 Edition 3.0 2011-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic fan
17、-outs Part 1-1: Blank detail specification Dispositifs dinterconnexion et composants passifs fibres optiques Systmes dclatement pour fibres optiques Partie 1-1: Spcification particulire cadre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 33.180.20 PRICE C
18、ODE CODE PRIX ISBN 978-2-88912-757-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61314-1-1 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Qualification inspection 5 3.1 Procedure . 5 3.
19、2 Test schedule and performance requirements . 5 4 Quality conformance inspection 5 4.1 Lot-by-lot and periodic procedure 5 4.2 Lot-by-lot inspection 6 4.3 Periodic inspection 6 5 Detail specification worksheet 6 Bibliography 12 Table 1 Fixed sample inspection schedule for qualification approval 15
20、. 9 Table 2 Lot-by-lot quality conformance inspection schedule Groups A and B 16 10 Table 3 Periodic quality conformance inspection schedule Groups C and D 17 10 Table 4 Details, measurements and performance requirements 18 11 61314-1-1 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OP
21、TIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC FAN-OUTS Part 1-1: Blank detail specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees).
22、The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Spec
23、ifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizatio
24、ns liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters
25、 express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National C
26、ommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Na
27、tional Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself do
28、es not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they h
29、ave the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature what
30、soever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced public
31、ations is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Stan
32、dard IEC 61314-1-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2005, of which it constitutes a technical revision. The specific
33、technical change from the previous edition of the document is to reconsider quality approval and quality conformance inspection and to add the mechanical and optical interface standards into the detail specification worksheet. 4 61314-1-1 IEC:2011 The text of this standard is based on the following
34、documents: FDIS Report on voting 86B/3271/FDIS 86B/3301/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of
35、IEC 61314 series under the general title Fibre optic interconnecting devices and passive components Fibre optic fan-outs, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site unde
36、r “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61314-1-1 IEC:2011 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC FAN-OUTS Part 1-1: Blank det
37、ail specification 1 Scope This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61314-1, Fibre optic interconnecting devices and passive components Fibre optic fanouts Part 1: Generic specification. It includes: a blank worksheet with instruc
38、tions for preparing detail specifications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of t
39、he referenced document (including any amendments) applies. IEC 60874-1:2006, Connectors for optical fibres and cables Generic specification IEC 61314-1:2009, Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1: Generic specification 3 Qualification inspection 3.1 P
40、rocedure The detail specification shall state the qualification approval procedure to be used, either the fixed sample or the lot-by-lot and periodic procedure may be used. 3.2 Test schedule and performance requirements The mandatory test schedules for qualification by the fixed sample procedure are
41、 defined in Table 1 of the detail specification worksheet (see Clause 4). The fixed sample procedure consists in subjecting a sample of specimens to the fixed sample qualification test sequence as specified in Table 1. The sample shall be drawn from current production. 4 Quality conformance inspecti
42、on 4.1 Lot-by-lot and periodic procedure The lot-by-lot and periodic procedure consists in performing the lot-by-lot inspections on a specified number of inspection lots (a minimum of three) taken in as short a time as possible. The periodic tests are then performed on samples selected from at least
43、 one of the lots. 6 61314-1-1 IEC:2011 Samples shall be selected from the lots in accordance with IEC 60410. Normal inspection shall be used, but when the sample size is so small that acceptance based on zero defects is implied, additional specimens shall be taken to meet the sample size requirement
44、s for acceptance on one defect 4.2 Lot-by-lot inspection The mandatory inspection schedules for lot-by-lot inspection (groups A and B) are defined in the detail specification worksheet (see Clause 5). 4.3 Periodic inspection The mandatory inspection schedules for periodic inspection (groups C and D)
45、 are defined in the detail specification worksheet (see Clause 5). 5 Detail specification worksheet The following worksheet is provided to aid in the preparation of detail specifications. Spaces are provided for entering information. When the spaces are completed, the detail specification can be dra
46、fted in its final form. The spaces are identified by numbers between square brackets. Instructions for completing these numbered spaces are given below. When drafting the final detail specification, eliminate the square-bracketed instruction numbers. 1 The national IEC number assigned to the detail
47、specification is added by the National Committee. 2 The date of the detail specification is added by the National Committee. 3 Enter the name and address of the National Committee. 4 Enter the applicable classification categories (see 4.2 of IEC 61314-1). 5 Enter the connector/splice type name. 6 En
48、ter the fan-out configuration. 7 Enter the applicable mechanical interface standard. If the connectors of the fan-out do not conform to a mechanical interface standard, add the words “not applicable“. 8 Enter the applicable optical interface standard. If the connectors of the fan-out do not conform
49、to an optical interface standard, add the words “not applicable“. 9 Enter the performance standard. If the connectors of the fan-out do not conform to a performance standard, add the words “not applicable“. 10 Add the qualification procedure required for the detail specification (fixed-sample procedure or lot-by-lot procedure. 11 Specify the component(s) control di
