1、 IEC 61314-1 Edition 4.0 2011-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1: Generic specification Dispositifs dinterconnexion et composants passifs fibres optiques Systmes dclatement pour fibres optiques Partie
2、1: Spcification gnrique IEC61314-1:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocop
3、ying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
4、IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms,
5、 sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de
6、 rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and
7、 related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-
8、line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published det
9、ails twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in addition
10、al languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Te
11、l.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des public
12、ations CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vo
13、us permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la
14、 CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et
15、en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des q
16、uestions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61314-1 Edition 4.0 2011-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1: Generic spec
17、ification Dispositifs dinterconnexion et composants passifs fibres optiques Systmes dclatement pour fibres optiques Partie 1: Spcification gnrique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-88912-760-3 Register
18、ed trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61314-1 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Requirements . 6 4.1 General . 6 4.2 Classification . 6 4.2.1 Gene
19、ral . 6 4.2.2 Style 7 4.2.3 Arrangement 7 4.2.4 Variant 8 4.2.5 Normative reference extensions 8 4.3 Documentation 9 4.3.1 Symbols 9 4.3.2 Specification system 9 4.3.3 Drawings . 10 4.3.4 Tests and measurements. 11 4.3.5 Test reports . 11 4.3.6 Instructions for use 11 4.4 Standardisation system . 11
20、 4.4.1 Interface standards 11 4.4.2 Performance standards 12 4.4.3 Optical interface standards 12 4.4.4 Reliability documentation . 13 4.4.5 Interlinking 13 4.5 Design and construction 15 4.5.1 Materials . 15 4.5.2 Workmanship. 15 4.6 Quality 15 4.7 Performance 15 4.8 Identification and marking . 15
21、 4.8.1 Variant identification number . 15 4.8.2 Component marking 16 4.8.3 Package marking . 16 4.9 Packaging . 16 4.10 Storage conditions 16 4.11 Safety . 17 Bibliography 18 Figure 1 Pigtail/patchcord fan-out 7 Figure 2 Semi-compact fan-out 7 Figure 3 Compact fan-out 7 Figure 4 Standards 14 Figure
22、5 Standards interlink matrix . 15 Table 1 Three-level IEC specification structure 9 61314-1 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC FAN-OUTS Part 1: Generic specification FOREWORD 1) The International Electrotechni
23、cal Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this
24、end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Co
25、mmittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
26、accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from al
27、l interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held r
28、esponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diver
29、gence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC m
30、arks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expe
31、rts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC P
32、ublication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC P
33、ublication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61314-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre
34、optics. This fourth edition cancels and replaces the third edition published in 2009 and constitutes a technical revision. The specific technical changes from the previous edition are to reconsider a drawing showing the relationship between IEC 60874, IEC 61753, IEC 61754 series of standards, and up
35、dating the normative references. 4 61314-1 IEC:2011 The text of this standard is based on the following documents: FDIS Report on voting 86B/3270/FDIS 86B/3300/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This
36、 publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 61314 series, under the general title Fibre optic interconnecting devices and passive components Fibre optic fan-outs can be found on the IEC website. Future standards in this series will carr
37、y the general new title as cited above. Titles of existing standards in this series will be updated at the time of the new edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.c
38、h“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61314-1 IEC:2011 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC FAN-OUTS Part 1: Generic specification 1 Scope This p
39、art of IEC 61314 specifies requirements for fan-outs used in the fibre optics field to provide a safe transition from multifibre cable units to individual fibres or cables. This standard corresponds to QC880000 of IEC Quality Assessment System. This standard does not cover test and measurement proce
40、dures, which are described in IEC 61300 series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any
41、 amendments) applies. IEC 60027 (all parts), Letter symbols to be used in electrical technology IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60617, Graphical symbols for diagrams IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needl
42、e-flame test method Apparatus, confirmatory test arrangement and guidance IEC 60793-1-1, Optical fibres Part 1-1: Measurement methods and test procedures General and guidance IEC 60794-1-1, Optical fibre cables Part 1-1: Generic specification General IEC 60825-1, Safety of laser products Part 1: Equ
43、ipment classification and requirements IEC 60869-1, Fibre optic attenuators Part 1: Generic specification IEC 60874-1, Connectors for optical fibres and cables Part 1: Generic specification IEC 61073-1, Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice p
44、rotectors for optical fibres and cables Part 1: Generic specification IEC 61300 (all parts), Fibre optic interconnecting devices and passive components IEC 61753 (all parts), Fibre optic interconnecting devices and passive components performance standard 6 61314-1 IEC:2011 IEC/TR 61930, Fibre optic
45、graphical symbology IEC/TR 61931, Fibre optic Terminology IEC Guide 102, Electronic components Specification structures for quality assessment (Qualification approval and capability approval) IECQ QC 001002-3, IEC Quality Assessment System for Electronic Components (IECQ System) Rules of procedure P
46、art 2: Documentation ISO 129, Technical drawings Indication of dimensions and tolerances ISO 286-1, Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Bases of tolerances, deviations and fits ISO 1101, Geometrical Product Specifications (GPS) Geometrical
47、tolerancing Tolerances of form, orientation, location and run-out ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-731, IEC 60874-1 and IEC
48、/TR 61931 as well as the following apply. 3.1 fibre optic fan-out passive component providing a transition from multifibre cable unit to individual fibres or cables having at least one fibre or cable end connectorised 3.2 transition box part of the fan-out where a multifibre cable is separated into
49、individual fibre or cables. It may contain splices 3.3 cable anchoring element part of the fan-out where the cable strength members are secured 4 Requirements 4.1 General The requirements for fan-outs covered by this specification are specified in this clause and in the relevant specification. 4.2 Classification 4.2.1 General Fibre optic fan-outs are cl
