1、 IEC 61338-4-1 Edition 1.0 2005-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Waveguide type dielectric resonators Part 4-1: Blank detail specification Rsonateurs dilectriques modes guids Partie 4-1: Spcification particulire cadre IEC 61338-4-1:2005 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright
2、 2005 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National
3、 Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sau
4、f indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous
5、 avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03
6、00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technica
7、l content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by
8、a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Avai
9、lable on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the Internat
10、ional Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale
11、(CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que v
12、ous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne
13、aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par ema
14、il. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechni
15、que International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61338-4-1 Edition 1.0 2005-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Waveguide type dielectric r
16、esonators Part 4-1: Blank detail specification Rsonateurs dilectriques modes guids Partie 4-1: Spcification particulire cadre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 31.140 PRICE CODE CODE PRIX ISBN 978-2-83220-769-7 Registered trademark of the Inte
17、rnational Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61338-4-1 IEC:2
18、005 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ WAVEGUIDE TYPE DIELECTRIC RESONATORS Part 4-1: Blank detail specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National
19、Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly A
20、vailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmenta
21、l organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tech
22、nical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by I
23、EC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unifo
24、rmity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)
25、IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors
26、, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out
27、 of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn t
28、o the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61338-4-1 has been prepared by IEC technical committee 49: Piezoelectric and dielectric
29、 devices for frequency control and selection. This bilingual version (2013-05) corresponds to the monolingual English version, published in 2005-03. The text of this standard is based on the following documents: FDIS Report on voting 49/703/FDIS 49/717/RVD Full information on the voting for the appr
30、oval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2 61338-4-1 IEC:2005 3 IEC 61338 consists of the following parts, un
31、der the general title Waveguide type dielectric resonators: Part 1: Generic specification Part 1-3: General information and test conditions Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency Part 2: Guidelines for oscillator and filter appli
32、cations Part 4: Sectional specification Part 4-1: Blank detail specification (this publication) The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to t
33、he specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 61338-4-1 IEC:2005 INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirem
34、ents for the minimum content of detail specifications. The front page layout shown on the next page is applicable to detail specifications for standard catalogue items only. For custom-built waveguide type dielectric resonators where the detail specification is not intended for publication, a sugges
35、ted layout for the front page is given in Annex A. This is not mandatory, but it is recommended that the layout should be followed whenever possible. Identification of the detail specification and of the component The numbers between square brackets on the front page of the detail specification corr
36、espond to the following information which should be given in the appropriate boxes. (1) The name of the National Standards Organization under whose authority the detail specification is published and, if applicable, the organization from whom the detail specification is available. (2) The IEC and Na
37、tional Standards number allotted to the detail specification, date of issue and any further information required by the national system. (3) The number and issue number of the IEC generic or sectional specification as relevant; also national reference if different. (4) If different from the IEC numb
38、er, the national number of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. (5) A brief description of the waveguide type dielectric resonator or range of resonators (For example, nominal frequency and type of r
39、esonator). For (5) the text to be given in the detail specification should be suitable for any entry in IEC QC 001005 and IEC QC 001004. (6) An outline drawing with main dimensions which are of importance for interchangeability and/or reference to the appropriate national or international document f
40、or outlines. Alternatively, this drawing may be given in an annex to the detail specification. 61338-4-1 IEC:2005 5 Specification available from: (1) Detail specification (2) Page 1 of ELECTRONIC COMPONENTS OF ASSESSED (3) QUALITY BY CAPABILITY APPROVAL IN ACCORDANCE WITH: Generic specification: IEC
41、 61338-1 Sectional specification: IEC 61338-4 (4) Outline and dimensions (6) (first angle projection): Dimensions in mm . (5) 6 61338-4-1 IEC:2005 1 Ratings (see 2.3 of IEC 61338-1 for preferred ratings) Rating temperature range Climatic category Mechanical test severities Information about manufact
42、urers who have components qualified to this detail specification is available in the current QC 001005. 2 Characteristics (see 2.3 of IEC 61338-1) Nominal frequency Reference temperature Frequency tolerance (s) (if applicable) Insertion attenuation In addition other characteristics may be stated. 3
43、Related documents IEC 61338-1, Waveguide type dielectric resonators Part 1: Generic specification IEC 61338-4, Waveguide type dielectric resonators Part 4: Sectional specification 4 Marking The marking of the resonator and the primary package shall be in accordance with the requirements of 2.4 of IE
44、C 61338-1. Full details shall be given in the detail specification. 5 Ordering information The following ordering information shall be specified: 1) quantity; 2) IECQ or customer detail specification number, issue number and date; 3) nominal frequency expressed in MHz or GHz; 4) product code; 5) ful
45、l description of any additional requirements. 6 Certified test records The detail specification shall state whether certified test records are required/not required in accordance with 3.12 of IEC 61338-1. 7 Additional information (not for inspection purposes) The detail specification may include inf
46、ormation (which is not normally required to be verified by the inspection procedure) such as circuit diagrams, curves, drawings and notes for the clarification of the detail specification. 61338-4-1 IEC:2005 7 8 Inspection requirements Clause numbers of tests and performance refer to IEC 61338-1 and
47、 are given in Table 1. In this table D = destructive ND = non-destructive The manufacturer and their customers shall ensure that any quality aspects of the resonators to be supplied that are not covered by the maintenance of the capability approval programme are included in the detail specification.
48、 The blank detail specification does not include any periodic tests as these are controlled by the CQC testing under the maintenance of the capability approval as defined in 3.6.2 and 3.6.2.1 of IEC 61338-1. Table 1 Clause number and test D or ND Test conditions Performance requirements 100 % inspec
49、tion 4.3 Visual test 4.5.2 Insertion or 4.5.3 attenuation ND 4.3 4.5.2 or 4.5.3 3.3 Specified values Group B inspection To be conducted on a sampling basis Sub-Group B1 Dimensions ND 4.4 Specified values 8 61338-4-1 IEC:2005 Annex A (informative) Example front page layout for customer detail specifications not for publication Customer: Specification reference Issue number Date Page 1 of Manufacturer: ELECTRO
