1、 IEC 61443Edition 1.1 2008-11INTERNATIONAL STANDARD NORME INTERNATIONALEShort-circuit temperature limits of electric cables with rated voltages above 30 kV (Um= 36 kV) Limites de temprature de court-circuit des cbles lectriques de tension assigne suprieure 30 kV (Um= 36 kV) IEC61443:1999+A1:2008 THI
2、S PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in w
3、riting from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further i
4、nformation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit na
5、tional de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Var
6、emb CH-1211 Geneva 20 Switzerland Email: inmailiec.chWeb: www.iec.chAbout the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications
7、 The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a var
8、iety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications relea
9、sed. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International
10、 Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.chTel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A p
11、ropos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publicatio
12、ns de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisa
13、nt diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par moi
14、s les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents da
15、ns les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou
16、 contactez-nous: Email: csciec.chTl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61443Edition 1.1 2008-11INTERNATIONAL STANDARD NORME INTERNATIONALEShort-circuit temperature limits of electric cables with rated voltages above 30 kV (Um= 36 kV) Limites de temprature de court-circuit des cbles lectriq
17、ues de tension assigne suprieure 30 kV (Um= 36 kV) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CBICS 29.060.20 PRICE CODECODE PRIXISBN 2-8318-1014-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotec
18、hnique Internationale 2 61443 IEC:1999+A1:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references6 3 Factors governing the application of the temperature limits .6 4 Maximum permissible short-circuit temperatures for cables with rated voltages above 30 kV (Um = 36 kV).8 Table 1 Temp
19、erature limits for insulation materials .9 Table 2 Temperature limits for oversheath materials.9 Table 3 Temperature limits for current-carrying components.10 61443 IEC:1999+A1:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION SHORT-CIRCUIT TEMPERATURE LIMITS OF ELECTRIC CABLES WITH RATED VOLTAGES AB
20、OVE 30 kV (Um = 36 kV) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning
21、 standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their pre
22、paration is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
23、 with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant
24、subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the techn
25、ical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum exte
26、nt possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for an
27、y equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees
28、 and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8
29、) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rig
30、hts. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61443 has been prepared by subcommittee 20A: High-voltage cables, of IEC technical committee 20: Electric cables. This consolidated version of IEC 61443 consists of the first edition (199
31、9) documents 20A/409/FDIS and 20A/411/RVD and its amendment 1 (2008) documents 20/953/FDIS and 20/976/RVD. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 1.1. A vertical line in the margin sho
32、ws where the base publication has been modified by amendment 1. 4 61443 IEC:1999+A1:2008 The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the d
33、ata related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61443 IEC:1999+A1:2008 5 INTRODUCTION The following four aspects may be applicable when selecting the short-circuit rating of a cable system. a) The permi
34、ssible maximum temperature limits for cable components (e.g. conductor, insulation, screen or metallic sheath, bedding, armour and oversheath). For the range of voltages covered by this standard, dielectric integrity is the major limitation. For practical uses, the energy producing the temperature r
35、ise is usually expressed by an equivalent (I2t) value so that the permitted maximum duration for a given short-circuit current can be calculated. b) The maximum value of current which will not cause mechanical failure (such as bursting) due to electromagnetic forces. Irrespective of any temperature
36、limitations, this determines a maximum current which should not be exceeded. c) The thermal performance of joints and terminations at the limits of current and duration specified for the associated cable. Accessories should also withstand the thermo-mechanical and electromagnetic forces produced by
37、the short-circuit current in the cable. d) The influence of installation conditions on the above three aspects. Aspect a) is dealt with in detail, and the limits given are based on a consideration of the cable only. A single short-circuit application is not expected to produce any significant damage
38、 to the cable, but repeated short-circuits may cause cumulative damage. Guidance is given, where appropriate, on aspects c) and d) mainly as they concern thermo-mechanical forces in the conductors and metallic sheath. Aspect b) is not covered in this standard. The limits recommended in this standard
39、 should be used for guidance only. There is little scientific evidence available on the behaviour of actual cables under short-circuit conditions, most of the information being based on tests on the constituent materials themselves. It has been necessary to exercise considerable judgement in setting
40、 these recommended limits, and, in general, especially for the dielectric, the best average of present usage has been suggested. It is not possible to provide complete limits for joints and terminations because their construction is not standardized and performance varies. Where the full short-circu
41、it capability of the cable is needed, the accessories should be designed appropriately, but this is not always economically justified and the short-circuit capability of a cable system may be determined by the performance of its joints and terminations. Where possible, guidance has been included on
42、the performance of accessories when they are installed on cables subject to the short-circuit limits given in this standard. 6 61443 IEC:1999+A1:2008 SHORT-CIRCUIT TEMPERATURE LIMITS OF ELECTRIC CABLES WITH RATED VOLTAGES ABOVE 30 kV (Um = 36 kV) 1 Scope This International Standard gives guidance on
43、 the short-circuit maximum temperature limits of electric cables having rated voltages above 30 kV (Um = 36 kV) up to the voltage limits given in IEC 60141 and IEC 62067, with regard to the following: insulating materials; oversheath and bedding materials; conductor and metallic sheath materials and
44、 methods of connection. The design of accessories and the influence of the installation conditions on the temperature limits are taken into consideration. The calculation of the permissible short-circuit current in the current-carrying components of the cable should be carried out in accordance with
45、 IEC 60949. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60141 (all
46、 parts), Tests on oil-filled and gas-pressure cables and their accessories IEC 60840:1999, Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) Test methods and requirements IEC 60949:1988, Calculation of thermally permiss
47、ible short-circuit currents, taking into account the non-adiabatic heating effects IEC 62067, Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um= 170 kV) up to 500 kV (Um= 550 kV) Test methods and requirements 3 Factors governing the application of the te
48、mperature limits 3.1 General The short-circuit temperatures given in clause 4 are the actual temperatures of the current-carrying component as limited by the adjacent material in the cable and are valid for short-circuit durations of up to 5 s. When calculating the allowable short-circuit current, t
49、hese temperatures will be obtained if heat loss into the insulation during the short circuit is taken into account (non-adiabatic heating). If heat loss during the short-circuit is neglected (adiabatic heating), the calculations give short-circuit currents that are on the safe side. NOTE The temperature limits given in clause 4 should also not be exceeded with repeated short-circuits occuring in a short time. 61443
