1、 IEC 61672-2 Edition 2.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroacoustics Sound level meters Part 2: Pattern evaluation tests Electroacoustique Sonomtres Partie 2: Essais dvaluation dun modle IEC61672-2:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Swit
2、zerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the count
3、ry of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire,
4、 aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur
5、 le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 in
6、foiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC public
7、ations is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (
8、reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also
9、once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
10、Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire or
11、ganisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la
12、plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations
13、sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.
14、electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI)
15、 en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61672-2 Edition 2.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroacoustics Sound level meters Part 2: Pattern
16、evaluation tests Electroacoustique Sonomtres Partie 2: Essais dvaluation dun modle INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 17.140.50 PRICE CODE CODE PRIX ISBN 978-2-8322-1080-2 Registered trademark of the International Electrotechnical Commission Ma
17、rque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61672-2 IEC:2013 CONTENTS FOREWORD . 4 1 Scope . 6 2 No
18、rmative references . 6 3 Terms and definitions . 7 4 Submission for testing 7 5 Marking of the sound level meter and information in the Instruction Manual 8 6 Mandatory facilities and general requirements 8 7 Environmental, electrostatic, and radio-frequency tests 10 7.1 General . 10 7.2 Uncertainti
19、es for measurements of environmental test conditions 11 7.3 Influence of static pressure . 11 7.4 Limits on air temperature, relative humidity and static pressure . 12 7.5 Acclimatization requirements for tests of the influence of air temperature and relative humidity 12 7.6 Abbreviated test of the
20、combined influence of air temperature and relative humidity 12 7.7 Influence of air temperature . 14 7.8 Influence of relative humidity . 15 7.9 Influence of electrostatic discharges 16 7.10 Influence of a.c. power-frequency and radio-frequency fields. 17 7.10.1 Sound signal . 17 7.10.2 AC power-fre
21、quency tests . 17 7.10.3 Radio-frequency tests 17 8 Radio-frequency emissions and public power supply disturbances 19 9 Electroacoustical performance tests . 20 9.1 General . 20 9.2 Indication at the calibration check frequency . 21 9.3 Directional response 21 9.4 Tests of frequency weightings with
22、acoustical signals 23 9.4.1 General . 23 9.4.2 Windscreen corrections . 24 9.4.3 Free-field tests 24 9.4.4 Comparison coupler tests 25 9.4.5 Conformance . 26 9.4.6 Random incidence . 26 9.5 Tests of frequency weightings with electrical signals . 27 9.5.1 General . 27 9.5.2 First alternative test pro
23、cedure (variable input signal level) 27 9.5.3 Second alternative test procedure (constant input signal level) 27 9.5.4 Conformance . 28 9.5.5 Frequency weightings C or Z at 1 kHz . 28 9.6 Corrections for the effect of reflections from the case of a sound level meter and diffraction around a micropho
24、ne 28 9.7 Corrections to obtain free-field or random-incidence sound levels . 29 9.8 Level linearity 30 9.8.1 Tests at an air temperature near the reference air temperature . 30 9.8.2 Tests at elevated air temperature 31 61672-2 IEC:2013 3 9.9 Under-range indication 31 9.10 Self-generated noise leve
25、l . 31 9.11 Decay time constants for time weightings F and S . 32 9.12 Toneburst response for sound level meters that measure time-weighted sound level 32 9.13 Toneburst response for sound level meters that measure sound exposure level or time-averaged sound level 33 9.14 Response to sequences of re
26、peated tonebursts for sound level meters that measure time-averaged sound level 34 9.15 Overload indication . 34 9.16 C-weighted peak sound level . 35 9.17 Reset 36 9.18 Electrical output 36 9.19 Timing facilities . 36 9.20 Crosstalk in multi-channel sound level meter systems . 36 9.21 Power supply
27、 36 10 Pattern evaluation report 37 Bibliography 38 4 61672-2 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROACOUSTICS SOUND LEVEL METERS Part 2: Pattern evaluation tests FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization com
28、prising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Sta
29、ndards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this pre
30、paratory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organ
31、izations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form
32、of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretati
33、on by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regi
34、onal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out
35、by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees
36、for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the N
37、ormative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held re
38、sponsible for identifying any or all such patent rights. International Standard IEC 61672-2 has been prepared by IEC technical committee 29, Electroacoustics, in cooperation with the International Organization of Legal Metrology (OIML). This second edition cancels and replaces the first edition publ
39、ished in 2003. This second edition constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: In this second edition, conformance to specifications is demonstrated when: a) measured deviations from design goals do not exceed the applicable accept
40、ance limits, and b) the uncertainty of measurement does not exceed the corresponding maximum permitted uncertainty, with both uncertainties determined for a coverage probability of 95 %. 61672-2 IEC:2013 5 The text of this second edition is based on that of the first edition and the following docume
41、nts: FDIS Report on voting 29/813/FDIS 29/824/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61
42、672 series, published under the general title Electroacoustics Sound level meters, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data r
43、elated to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 61672-2 IEC:2013 ELECTROACOUSTICS SOUND LEVEL METERS Part 2: Pattern-evaluation tests 1 Scope This part of IEC 61672 provides details of the tests necessary
44、to verify conformance to all mandatory specifications given in IEC 61672-1 for time-weighting sound level meters, integrating-averaging sound level meters, and integrating sound level meters. Pattern-evaluation tests apply for each channel of a multi-channel sound level meter, as necessary. Tests an
45、d test methods are applicable to class 1 and class 2 sound level meters. The aim is to ensure that all laboratories use consistent methods to perform pattern-evaluation tests. NOTE 1 In this document, references to IEC 61672-1, IEC 61672-2, and IEC 61672-3 refer to the second editions unless stated
46、otherwise. NOTE 2 Procedures for the pattern-evaluation testing of sound level meters designed to conform to the specifications of IEC 61672-1:2002 were given in IEC 61672-2:2003. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are
47、 indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60942, Electroacoustics Sound calibrators IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) Pa
48、rt 4-2: Testing and measurement techniques Electrostatic discharge immunity test IEC 61000-4-3:2010, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic-field immunity test IEC 61000-4-6:2008, Electromagnetic compatibility (EMC)
49、 Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields IEC 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments IEC 61094-1, Measurement microphones Part 1: Specifications for laboratory standard microphones IEC 61094-5, Measurement microphones Part 5: Methods for pressure calibration of wor
