1、 IEC 61784-5-18 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks Profiles Part 518: Installation of fieldbuses Installation profiles for CPF 18 Rseaux de communication industriels Profils Partie 5-18: Installation des bus de terrain Profils dinstallat
2、ion pour CPF 18 IEC 61784-5-18:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, includin
3、g photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or y
4、our local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les m
5、icrofilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de vot
6、re pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Sta
7、ndards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publ
8、ications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay
9、 up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitio
10、ns in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Cu
11、stomer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CE
12、I Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des pu
13、blications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Publishe
14、d dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi q
15、ue les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61
16、784-5-18 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks Profiles Part 518: Installation of fieldbuses Installation profiles for CPF 18 Rseaux de communication industriels Profils Partie 5-18: Installation des bus de terrain Profils dinstallation pou
17、r CPF 18 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 25.040.40; 35.100.40 PRICE CODE CODE PRIX ISBN 978-2-8322-1071-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale War
18、ning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 61784-5-18 IEC:2013 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope . 9 2 Normative references . 9 3 Term
19、s, definitions and abbreviated terms . 9 4 CPF 18: Overview of installation profiles 9 5 Installation profile conventions . 9 6 Conformance to installation profiles 10 Annex A (normative) CP 18/1 and CP 18/2 (SafetyNET p) specific installation profile 11 A.1 Installation profile scope . 11 A.2 Norma
20、tive references . 11 A.3 Installation profile terms, definitions, and abbreviated terms . 11 A.3.1 Terms and definitions 11 A.3.2 Abbreviated terms . 11 A.3.3 Conventions for installation profiles . 11 A.4 Installation planning . 11 A.4.1 Gnral . 11 A.4.1.1 Objective . 11 A.4.1.2 Cabling in industri
21、al premises 11 A.4.1.3 The planning process 11 A.4.1.4 Specific requirements for CPs . 11 A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 11 A.4.2 Planning requirements . 11 A.4.2.1 Safety 11 A.4.2.2 Security . 11 A.4.2.3 Environmental considerations and EMC . 12 A
22、.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 12 A.4.3 Network capabilities 12 A.4.3.1 Network topology . 12 A.4.3.2 Network characteristics . 12 A.4.4 Selection and use of cabling components 14 A.4.4.1 Cable selection . 14 A.4.4.2 Connecting hardware selection .
23、15 A.4.4.3 Connections within a channel/permanent link 16 A.4.4.4 Terminators 17 A.4.4.5 Device location and connection . 17 A.4.4.6 Coding and labelling . 17 A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 18 A.4.4.8 Storage and transportation of cables . 18 A.4.4.9 Routi
24、ng of cables 19 A.4.4.10 Separation of circuit 19 A.4.4.11 Mechanical protection of cabling components . 19 61784-5-18 IEC:2013 3 A.4.4.12 Installation in special areas . 19 A.4.5 Cabling planning documentation 19 A.4.5.1 Common description 19 A.4.5.2 Cabling planning documentation for CPs . 19 A.4.
25、5.3 Network certification documentation 19 A.4.5.4 Cabling planning documentation for generic cabling in accordance with ISO/IEC 24702 . 19 A.4.6 Verification of cabling planning specification . 19 A.5 Installation implementation . 19 A.5.1 General requirements 19 A.5.1.1 Common description 19 A.5.1
26、.2 Installation of CPs . 19 A.5.1.3 Installation of generic cabling in industrial premises 19 A.5.2 Cable installation . 20 A.5.2.1 General requirements for all cabling types . 20 A.5.2.2 Installation and routing 21 A.5.2.3 Specific requirements for CPs . 21 A.5.2.4 Specific requirements for wireles
27、s installation 21 A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 21 A.5.3 Connector installation 22 A.5.3.1 Common description 22 A.5.3.2 Shielded connectors 22 A.5.3.3 Unshielded connectors 22 A.5.3.4 Specific requirements for CPs . 22 A.5.3.5 Specific requiremen
28、ts for generic cabling in accordance with ISO/IEC 24702 22 A.5.4 Terminator installation . 22 A.5.5 Device installation . 22 A.5.5.1 Common description 22 A.5.5.2 Specific requirements for CPs . 22 A.5.6 Coding and labelling 22 A.5.6.1 Common description 22 A.5.6.2 Specific requirements for CPs . 22
29、 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 22 A.5.7.1 Common description 22 A.5.7.2 Bonding and earthing of enclosures and pathways 22 A.5.7.3 Earthing methods 22 A.5.7.4 Shield termination methods . 22 A.5.7.5 Specific requirements for CPs . 23 A.5.7.6 Specific requir
30、ements for generic cabling in accordance with ISO/IEC 24702 23 A.5.8 As-implemented cabling documentation . 23 A.6 Installation verification and installation acceptance test 23 A.6.1 General . 23 A.6.2 Installation verification . 23 A.6.2.1 General . 23 A.6.2.2 Verification according to cabling plan
31、ning documentation 23 A.6.2.3 Verification of earthing and bonding 23 A.6.2.4 Verification of shield earthing 23 4 61784-5-18 IEC:2013 A.6.2.5 Verification of cabling system 23 A.6.2.6 Cable selection verification . 23 A.6.2.7 Connector verification . 23 A.6.2.8 Connection verification 23 A.6.2.9 Te
32、rminators verification . 24 A.6.2.10 Coding and labelling verification . 24 A.6.2.11 Verification report . 24 A.6.3 Installation acceptance test . 24 A.6.3.1 General . 24 A.6.3.2 Acceptance test of Ethernet-based cabling 24 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 24 A.6.3.4 Specific
33、requirements for wireless installation 24 A.6.3.5 Acceptance test report . 24 A.7 Installation administration . 25 A.7.1 General . 25 A.7.2 Fields covered by the administration . 25 A.7.3 Basic principles for the administration system . 25 A.7.4 Working procedures 25 A.7.5 Device location labelling
34、25 A.7.6 Component cabling labelling 25 A.7.7 Documentation 25 A.7.8 Specific requirements for administration 25 A.8 Installation maintenance and installation troubleshooting . 25 A.8.1 General . 25 A.8.2 Maintenance 25 A.8.2.1 Scheduled maintenance 25 A.8.2.2 Condition-based maintenance . 25 A.8.2.
35、3 Corrective maintenance . 25 A.8.3 Troubleshooting 25 A.8.3.1 General description . 25 A.8.3.2 Evaluation of the problem 25 A.8.3.3 Typical problems . 25 A.8.3.4 Troubleshooting procedure 25 A.8.3.5 Simplified troubleshooting procedure . 25 A.8.4 Specific requirements for maintenance and troublesho
36、oting 25 Bibliography 26 Figure 1 Standards relationships 8 Table A.1 Network characteristics for balanced cabling based on Ethernet 13 Table A.2 Network characteristics for optical fibre cabling 13 Table A.3 Information relevant to copper cable: fixed cables 14 Table A.4 Information relevant to cop
37、per cable: cords 14 Table A.5 Information relevant to optical fibre cables . 15 Table A.6 Connectors for balanced cabling CPs based on Ethernet . 15 Table A.7 Optical fibre connecting hardware 16 Table A.8 Relationship between FOC and fibre types (CP 18/1 and CP 18/2) 16 Table A.9 Parameters for bal
38、anced cables . 20 61784-5-18 IEC:2013 5 Table A.10 Parameters for silica optical fibre cables 20 Table A.11 Parameters for POF optical fibre cables . 20 Table A.12 Parameters for hard clad silica optical fibre cables . 21 6 61784-5-18 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL C
39、OMMUNICATION NETWORKS PROFILES Part 518: Installation of fieldbuses Installation profiles for CPF 18 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The obje
40、ct of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specificatio
41、ns (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liais
42、ing with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express
43、, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committee
44、s in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National C
45、ommittees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not p
46、rovide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the
47、latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever,
48、whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications i
49、s indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61784-5-18 has been prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-proc
