1、 IEC 61987-15 Edition 1.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange Mesure et commande des
2、processus industriels lments et structures de donnes dans les catalogues dquipements de processus Partie 15: Listes de proprits (LOP) pour quipement de mesure de niveau pour lchange lectronique de donnes IEC 61987-15:2016-11(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva,
3、Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the c
4、ountry of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contra
5、ire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur
6、 le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoie
7、c.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publicatio
8、ns is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Sta
9、ndards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It
10、 also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electrop
11、edia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossa
12、ry 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If
13、you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout
14、 ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webst
15、ore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.
16、ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez infor
17、m sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions
18、 en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles T
19、ermes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez
20、-nous: csciec.ch. IEC 61987-15 Edition 1.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange Mesure
21、 et commande des processus industriels lments et structures de donnes dans les catalogues dquipements de processus Partie 15: Listes de proprits (LOP) pour quipement de mesure de niveau pour lchange lectronique de donnes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATI
22、ONALE ICS 25.040.40; 35.100.20 ISBN 978-2-8322-3718-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous ass
23、urer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61987-15:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 3.1 General . 8 3.2 Level terms . 8 4 General . 8 4.1 Overview. 8 4.2 Special considerations 8 4.3 Dep
24、iction of OLOP and DLOPs . 10 4.4 Example of DLOP block usage 11 4.4.1 General specification of a free-space radar level transmitter 11 4.4.2 General specification of a vibration level switch . 17 Annex A (normative) Operating list of properties for level measuring equipment 20 Annex B (normative) D
25、evice lists of properties for level measuring equipment . 21 B.1 Level indicators . 21 B.1.1 Sight level indicator . 21 B.2 Level gauges 21 B.2.1 Magnetic level gauge . 21 B.2.2 Sight level gauge . 21 B.3 Level switches 21 B.3.1 Level switch . 21 B.3.2 Capacitance level switch . 22 B.3.3 Conductance
26、 level switch 22 B.3.4 Displacer level switch 22 B.3.5 Float level switch . 22 B.3.6 Guided-wave radar level switch . 22 B.3.7 Microwave level switch 23 B.3.8 Nuclear level switch . 23 B.3.9 Optical level switch 23 B.3.10 Rotary paddle switch . 23 B.3.11 Thermal level switch 23 B.3.12 Vibrating leve
27、l switch . 24 B.3.13 Ultrasonic level switch . 24 B.4 Level transmitters . 24 B.4.1 Level transmitter 24 B.4.2 Capacitance level transmitter . 24 B.4.3 Conductance level transmitter 25 B.4.4 Displacer level transmitter . 25 B.4.5 Free-space radar level transmitter . 25 B.4.6 Float level transmitter
28、25 B.4.7 Guided-wave radar level transmitter 25 B.4.8 Hydrostatic pressure level transmitter 26 B.4.9 Laser level transmitter . 26 B.4.10 Plumb bob level transmitter . 26 IEC 61987-15:2016 IEC 2016 3 B.4.11 Nuclear level transmitter 26 B.4.12 Servo level transmitter . 26 B.4.13 Ultrasonic level tran
29、smitter 27 B.5 Components . 27 B.5.1 Bypass/measuring chamber . 27 B.5.2 Separate level transmitter/switching unit 27 B.5.3 Stilling well 27 B.5.4 Window . 27 Annex C (normative) Property library . 28 Annex D (normative) Block library for considered device types 29 Bibliography 30 Figure 1 Reference
30、 framework for the installation of level transmitters . 9 Figure 2 Reference framework for the installation of level switches 10 Table 1 Example of free-space radar level transmitter 11 Table 2 Example for “vibration level switch” . 17 4 IEC 61987-15:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMM
31、ISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization
32、for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publ
33、ishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
34、participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreeme
35、nt between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Pub
36、lications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or
37、 for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corres
38、ponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for a
39、ny services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and
40、IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Att
41、ention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
42、IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-15 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text o
43、f this standard is based on the following documents: FDIS Report on voting 65E/507/FDIS 65E/517/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Dir
44、ectives, Part 2. IEC 61987-15:2016 IEC 2016 5 A list of all parts in the IEC 61987, published under the general title Industrial-process measurement and control Data structures and elements in process equipment catalogues, can be found on the IEC website. The committee has decided that the contents
45、of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 61987-15:2016
46、IEC 2016 INTRODUCTION The exchange of product data between companies, business systems, engineering tools, data systems within companies and, in the future, control systems (electrical, measuring and control technology) can run smoothly only when both the information to be exchanged and the use of t
47、his information has been clearly defined. Prior to this document, requirements on process control devices and systems were specified by customers in various ways when suppliers or manufacturers were asked to quote for suitable equipment. The suppliers in their turn described the devices according to
48、 their own documentation schemes, often using different terms, structures and media (paper, databases, CDs, e-catalogues, etc.). The situation was similar in the planning and development process, with device information frequently being duplicated in a number of different information technology (IT)
49、 systems. Any method that is capable of recording all existing information only once during the planning and ordering process and making it available for further processing, gives all parties involved an opportunity to concentrate on the essentials. A precondition for this is the standardization of both the descriptions of the objects and the exchange of information. IEC 61987 series proposes a method f
