1、 IEC 62343 Edition 2.0 2017-05 INTERNATIONAL STANDARD Dynamic modules General and guidance IEC 62343:2017-05(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized
2、in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional ri
3、ghts to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electro
4、technical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that
5、you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other docum
6、ents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publica
7、tions. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and ele
8、ctrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and Frenc
9、h extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need furth
10、er assistance, please contact the Customer Service Centre: csciec.ch. IEC 62343 Edition 2.0 2017-05 INTERNATIONAL STANDARD Dynamic modules General and guidance INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.180.01, 33.180.99 ISBN 978-2-8322-4296-4 Registered trademark of the International Electrot
11、echnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 62343:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 3.1 General terms and definitions . 8 3.2 Dynamic module terms and d
12、efinitions 8 3.3 Dynamic channel equalizer (DCE) terms and definitions . 9 3.4 Tuneable dispersion compensator (TDC) or dynamic chromatic dispersion compensator (DCDC) terms and definitions 9 3.5 Dynamic gain tilt equalizer (DGTE) terms and definitions 10 3.6 Optical channel monitor (OCM) terms and
13、definitions 10 3.7 Wavelength selective switch (WSS) terms and definitions . 14 4 Preparation of standards . 21 4.1 General . 21 4.2 Product definition 22 4.3 Tests 22 4.4 Details 22 4.5 Requirements . 22 4.6 Sample size 22 4.7 Sample definition 22 4.8 Groupings/sequences . 22 4.9 Pass/fail criteria
14、 22 4.10 Reference product definition . 22 4.11 Performance standard test report 23 5 Electromagnetic compatibility (EMC) requirements 23 Bibliography 24 Figure 1 Illustration of X-dB bandwidth . 15 Figure 2 Illustration of adjacent channel crosstalk and adjacent channel isolation 16 Figure 3 Illust
15、ration of non-adjacent channel crosstalk . 17 Figure 4 Illustration of latency time, rise time, fall time, bounce time, and switching time 20 IEC 62343:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DYNAMIC MODULES GENERAL AND GUIDANCE FOREWORD 1) The International Electrotechnical Comm
16、ission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
17、in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee
18、interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accorda
19、nce with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inter
20、ested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsi
21、ble for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence b
22、etween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of
23、 conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
24、 members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publicat
25、ion or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publicat
26、ion may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62343 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This second edition c
27、ancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: the inclusion of definitions for the wavelength selective switch. The text of this Internatio
28、nal Standard is based on the following documents: FDIS Report on voting 86C/1444/FDIS 86C/1450/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Dire
29、ctives, Part 2. 4 IEC 62343:2017 IEC 2017 A list of all the parts in the IEC 62343 series, published under the general title Dynamic modules, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on t
30、he IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 62343:2017 IEC 2017 5 INT
31、RODUCTION IEC 62343 applies to dynamic devices as defined in IEC TS 62538. This document contains general guidance for the IEC 62343 series related to dynamic devices and definitions which apply to dynamic devices. The dynamic module (DM), or device, has two distinguishing characteristics: dynamic a
32、nd module. “Dynamic“ highlights the functions of the products to include “tuning, varying, switching, configuring, and other continuous optimization,“ often accomplished by electronics, firmware, software or their combinations. The dynamic device usually has a certain level of intelligence to monito
33、r or measure the situation and make decisions for necessary (optimization) actions. The behaviour of dynamic modules may be characterized by transient characteristics as the dynamic module undergoes tuning, switching, configuring and other continuous optimization. Characterization of transient chara
34、cteristics will be considered in individual dynamic module standards. “Module“ defines that the products covered by the standard are the integration of active and passive components (either or both), through interconnecting materials or devices. The controlling electronics can be inside or outside t
35、he optical package (that contains all or most of the optical components and interconnection). The product can look like a small printed wiring board (PWB or child-board with mounted optical module) or a small box (housing) with optical components and electronics enclosed. In the former case, it is m
36、ore like an assembly (generally not packaged in a box or housing) than a module (generally packaged in a box or housing). For historical reasons and convenience, a dynamic module or device is referred to as a dynamic module in the IEC 62343 series. The number of dynamic modules and devices is rapidl
37、y growing as optical communications networks evolve. The following list provides some examples of the products covered by the IEC 62343 series. It should be noted that the list is not exhaustive and the products to be covered are not limited by the listed examples: channel gain equalizer; dynamic ch
38、annel equalizer; dynamic gain tilt equalizer; dynamic slope equalizer; tuneable chromatic dispersion compensator; polarization mode dispersion compensator; reconfigurable optical add-drop multiplexer; switch with monitoring and controls; variable optical attenuator with monitoring and controls; opti
39、cal channel monitor; wavelength selective switch; multicast optical switch. The IEC 62343 series will cover performance templates, performance standards, reliability qualification requirements, hardware and software interfaces, and related testing methods. The structure of the IEC 62343 series, unde
40、r the general title Dynamic modules, is as follows: 62343-1 series Part 1: Performance standards 62343-2 series Part 2: Reliability qualification 6 IEC 62343:2017 IEC 2017 62343-3 series Part 3: Performance specification templates 62343-4 series Part 4: Software and hardware interface standards 6234
41、3-5 series Part 5: Test methods 62343-6 series Part 6: Design guides A complete set of standards related to a dynamic module or device should include the following: optical performance standards; reliability qualification standards; optical performance specification templates; hardware and software
42、interface standards; test methods; technical reports. The safety standards related to dynamic modules are mostly optical power considerations, which are covered by IEC TC 76: Optical radiation safety and laser equipment. Only those dynamic modules for which standards are complete or in preparation a
43、re included in Clause 3. To reflect the rapidly growing market for dynamic modules, additional terms and definitions will be added in subsequent revisions as the series expands. It should be noted that optical amplifiers could be regarded as dynamic modules. They are not included in the IEC 62343 se
44、ries but are covered in their own series of IEC standards. IEC 62343:2017 IEC 2017 7 DYNAMIC MODULES GENERAL AND GUIDANCE 1 Scope IEC 62343 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, funda
45、mental considerations and basic approaches. The object of this document is to establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and provide assistance to the purchaser in the selection of
46、consistently high-quality DM products for his particular applications, as well as in the consultation of the appropriate specific DM standard(s). This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related te
47、sting methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since “dynamic module“ is a relatively new product category, the dynamic module
48、standards series will not be bounded by the existing practices where requirements differ. The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by IEC TC 76: Optical radiation safety and laser equipment. 2 Normative references The following docu
49、ments are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC TR 61931, Fibre optic Terminology IEC Guide 107, Electromagnetic compat
