1、 IEC 62599-2 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Part 2: Electromagnetic compatibility Immunity requirements for components of fire and security alarm systems Systmes dalarme Partie 2: Compatibilit lectromagntique Exigences relatives limmunit des composants
2、des systmes dalarme de dtection dincendie et de scurit IEC 62599-2:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic o
3、r mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact
4、the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris
5、la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit nat
6、ional de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards fo
7、r all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications:
8、www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC
9、publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, w
10、ith equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or
11、 contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies
12、 apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le
13、 Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur
14、les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 ter
15、mes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette p
16、ublication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62599-2 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Part 2: Electromagnetic compatibility Immunity require
17、ments for components of fire and security alarm systems Systmes dalarme Partie 2: Compatibilit lectromagntique Exigences relatives limmunit des composants des systmes dalarme de dtection dincendie et de scurit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS
18、 13.320 PRICE CODE CODE PRIX ISBN 978-2-88910-924-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62599-2 IEC:2010 CONTENTS FOREWORD.5 1 Scope.7 2 Normative references .7 3 Terms, definitions and abbreviations 8
19、3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Application of tests .9 5 Conditions during testing9 5.1 Configuration.9 5.2 Environmental conditions 10 5.3 Operating condition .10 6 Functional test10 7 Mains supply voltage variations10 7.1 Object of the test.10 7.2 Principle10 7.3 Test procedure1
20、1 7.3.1 General .11 7.3.2 Initial examination .11 7.3.3 State of specimen during conditioning .11 7.3.4 Conditioning 11 7.3.5 Measurements during conditioning 11 7.3.6 Final measurements 11 7.4 Criteria for compliance 11 8 Mains supply voltage dips and short interruptions.11 8.1 Object of the test.1
21、1 8.2 Principle12 8.3 Test procedure12 8.3.1 General .12 8.3.2 Initial examination .12 8.3.3 State of specimen during conditioning .12 8.3.4 Conditioning 12 8.3.5 Measurements during conditioning 12 8.3.6 Final measurements 12 8.4 Criteria for compliance 12 9 Electrostatic discharge .13 9.1 Object o
22、f the test.13 9.2 Principle13 9.3 Test procedure13 9.3.1 General .13 9.3.2 Initial examination .13 9.3.3 State of specimen during conditioning .13 9.3.4 Conditioning 13 9.3.5 Measurements during conditioning 14 9.3.6 Final measurements 14 9.4 Criteria for compliance 14 10 Radiated electromagnetic fi
23、elds14 62599-2 IEC:2010 3 10.1 Object of the test.14 10.2 Principle14 10.3 Test procedure14 10.3.1 General .14 10.3.2 Initial examination .15 10.3.3 State of specimen during conditioning .15 10.3.4 Conditioning 15 10.3.5 Measurements during conditioning 16 10.3.6 Final measurements 16 10.4 Criteria
24、for compliance 16 11 Conducted disturbances induced by electromagnetic fields 17 11.1 Object of the test.17 11.2 Principle17 11.3 Test procedure17 11.3.1 General .17 11.3.2 Initial examination .18 11.3.3 State of specimen during conditioning .18 11.3.4 Conditioning 18 11.3.5 Measurements during cond
25、itioning 18 11.3.6 Final measurements 18 11.4 Criteria for compliance 19 12 Fast transient bursts.19 12.1 Object of the test.19 12.2 Principle19 12.3 Test procedure.19 12.3.1 General .19 12.3.2 Initial examination .19 12.3.3 State of specimen during conditioning .19 12.3.4 Conditioning 19 12.3.5 Mea
26、surements during conditioning 20 12.3.6 Final measurements 20 12.4 Criteria for compliance 20 13 Slow high energy voltage surge20 13.1 Object of the test.20 13.2 Principle20 13.3 Test procedure21 13.3.1 General .21 13.3.2 Initial examination .22 13.3.3 State of specimen during conditioning .22 13.3.
27、4 Conditioning 22 13.3.5 Measurements during conditioning 23 13.3.6 Final measurements 23 13.4 Criteria for compliance 23 Figure 1 Example of relative orientations of the EUT and the field vectors .15 Figure 2 Forms of the modulation types relative to the continuous wave 16 Figure 3 Typical arrangem
28、ent for coupling onto screened signal lines22 4 62599-2 IEC:2010 Table 1 .11 Table 2 .12 Table 3 .13 Table 4 .16 Table 5 .18 Table 6 .20 Table 7 .22 62599-2 IEC:2010 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ALARM SYSTEMS Part 2: Electromagnetic compatibility Immunity requirements for components
29、 of fire and security alarm systems FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questio
30、ns concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)
31、). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collab
32、orates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on
33、 the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure
34、that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to th
35、e maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification b
36、odies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach
37、to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) a
38、nd expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.
39、9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62599-2 has been prepared by IEC technical committee 79: Alarm a
40、nd electronic security systems. This standard is based on EN 50130-4 (1995) and its amendments 1 (1998) and 2 (2003), and integrates the most recent ACEC recommendations 1 . _ 1ACEC: Advisory Committee on Electromagnetic Compatibility is an IEC committee. 6 62599-2 IEC:2010 The text of this standard
41、 is based on the following documents: FDIS Report on voting 79/277/FDIS 79/293/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
42、A list of all parts in the IEC 62599 series, under the general title Alarm systems, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data
43、related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62599-2 IEC:2010 7 ALARM SYSTEMS Part 2: Electromagnetic compatibility Immunity requirements for components of fire and security alarm systems 1 Scope This pa
44、rt of IEC 62599 for immunity requirements applies to the components of the following alarm systems, intended for use in and around buildings in residential, commercial, light industrial and industrial environments: access control systems, for security applications; alarm transmission systems 2 ; CCT
45、V systems, for security applications; fire detection and fire alarm systems; intruder and hold-up alarm systems; social alarm systems. The tests and severities that should be used are the same for indoor and outdoor applications of fixed, movable and portable equipment. The levels do not cover extre
46、me cases, which may occur in any location, but with an extremely low probability of occurrence, or in special locations close to powerful emitters (e.g. radar transmitters). Equipment within the scope of this standard should be designed in order to operate satisfactorily in the environmental electro
47、magnetic conditions of residential, commercial, light industrial and industrial environments. This implies particularly that it should be able to operate correctly within the conditions fixed by the electromagnetic compatibility levels for the various disturbances on the low voltage public supply sy
48、stem as defined by IEC 61000-2-2. The immunity tests in this standard only concern the most critical disturbance phenomena. For equipment using radio signalling, mains signalling or with connections to the public telephone system, additional requirements, from other standards specific to these signa
49、lling media, may apply. This standard does not specify basic safety requirements, such as protection against electrical shocks, unsafe operation, insulation coordination and related dielectric tests. This standard does not cover EMC emission requirements. These are covered by other appropriate standards. 2 Normative references The following referenced documents
