1、 IEC 62680-2-3 Edition 1.0 2015-09 INTERNATIONAL STANDARD Universal serial bus interfaces for data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 IEC 62680-2-3:2015-09(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Sw
2、itzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the cou
3、ntry of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Var
4、emb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC pu
5、blications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bi
6、bliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria
7、(reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also
8、once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnic
9、al Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 7
10、7, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62680-2-3 Edition 1.0 2015-09 INTERNATIONAL STANDARD Universal serial bus interfaces for
11、data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-2847-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this
12、publication from an authorized distributor. colour inside 2 IEC 62680-2-3:2015 IEC 2015 USB-IF 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 FOREWORD 1) The Internat
13、ional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electron
14、ic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees;
15、any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Stand
16、ardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has re
17、presentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,
18、IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional pub
19、lications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some ar
20、eas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents inclu
21、ding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or relia
22、nce upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the el
23、ements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-2-3 has been prepared by technical area 14: Interfaces and methods of measurement for personal computing equipment, of
24、 IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The structure and editorial rules used in this publication reflect the practice of the organization which submitted it. IE
25、C 62680-2-3:2015 IEC 2015 3 USB-IF 2014 The text of this standard is based on the following documents: CDV Report on voting 100/2333/CDV 100/2436/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all the
26、parts in the IEC 62680 series, published under the general title Universal serial bus interfaces for data and power can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication wi
27、ll remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication ma
28、y be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 4 IEC 62680-2-3:2
29、015 IEC 2015 USB-IF 2014 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Forum (USB-IF). These specifications were to submitted to the IEC under the auspices of a special agreement between the IEC and the USB IF. The USB
30、 Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology. The Forum faci
31、litates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY
32、, NON- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISI
33、ON OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensing arrangement
34、 for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS F
35、ORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1-1, Universal Serial Bus interfaces for data and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 IEC 62680-2-1, Universal Serial Bus int
36、erfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2-2, Universal Serial Bus interfaces for data and power Part 2-2: USB Micro- USB Cables and Connectors Specification, Revision 1.01 IEC 62680-2-3, Universal Serial Bus interfaces for data and power Part 2
37、-3: Universal Serial Bus Cables and Connectors Class Document Rev. 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, which consists of the original specification developed by the USB-IF. IEC 62680-2-3:2015 IEC 2015 5 USB-IF 2014 CONTENTS FOREWORD .
38、2 INTRODUCTION . 4 1 Introduction . 11 1.1 Purpose 11 1.2 Scope . 11 1.3 Related Documents . 11 1.4 Terms and Abbreviations 12 2 Management Overview 13 3 USB Electrical, Mechanical and Environmental Compliance Standards 13 4 Acceptance Criteria, Test Methods and Test Procedures . 17 4.1 Integrators
39、List (IL) . 17 4.2 USB Logo Usage 17 4.3 Compliance Test Report 17 4.4 Connector and Cable Assembly Physical Certification . 17 4.5 General Information 18 4.5.1 Mated Pairs . 18 4.5.2 Before Testing . 18 4.5.3 Test Sequences . 18 4.6 Sample Selection 18 4.7 USB Compliance Testing Interval 18 4.8 Pri
40、mary Qualification Approval Testing 19 4.9 Sustaining Qualification Approval Testing . 19 4.10 Compliance Test Sequences . 19 4.10.1 Inspection EIA 364-18 . 19 4.10.2 Test Group 1 21 4.10.3 Test Group 2 22 4.10.4 Test Group 3 23 4.10.5 Test Group 4 24 4.10.6 Test Group 5 25 4.10.7 Test Group 6 25 4.
41、10.8 Test Group 7 26 4.10.9 Test Group 8 27 5 Certification Acceptance and Submission 27 5.1 Compliance Test Report 28 5.2 Listing, Authorization and Notification . 28 5.2.1 Listing . 28 5.2.2 Authorization to use Certified USB Logo 28 5.2.3 Notification 28 Appendices . 29 Figure 4-1 Typical Contact
42、 Resistance Measurement . 22 Table 3-1 Electrical, Mechanical and Environmental Compliance Standards 14 Table 4-1 Test Conditions 18 Table 4-2 Performance Levels . 18 6 IEC 62680-2-3:2015 IEC 2015 USB-IF 2014 Table 4-3 Primary Qualification Approval Testing . 19 Table 4-4 Test Group 1 Durability, Vi
43、bration, Shock, Cable Retention and Mating/Un-mating Force 21 Table 4-5 Group 2 Temperature Life . 22 Table 4-6 Test Group 3 Mixed Flowing Gas 23 Table 4-7 Test Group 4 Insulation Resistance, Dielectric Withstanding Voltage, Thermal Shock & Humidity Temperature Cycling . 24 Table 4-8 Test Group 5 So
44、lderability 25 Table 4-9 Test Group 6 High Frequency Testing . 25 Table 4-10 Test Group 7 Critical Dimensions 26 Table 4-11 Test Group 8 Cable. 27 IEC 62680-2-3:2015 IEC 2015 7 USB-IF 2014 Universal Serial Bus Cables and Connectors Specification Revision 2.0 August, 2007 Revision History Revision Da
45、te Filename Comment 2.0 RC 6 August 10, 2007 CabConnRC6_Aug10.doc Added Go/No-go & latch measurement for Micro series Added Drain wire inspection process Added pin contact visual inspection Added clarifying text to 4-axis test description 2.0 RC5 June 5, 2007 CabConn20RC5_June5 Removed Shielding Eff
46、ectiveness Replace Rotational Continuity with 4-Axis continuity Other miscellaneous minor changes 2.0 RC4 May, 2007 CabConn20RC4_May07 Cable Construction inspection added 2.0 April 4, 2007 CabConn20 Removed Shielding Effectiveness, Added power line resistance test Added cable rotation test 2.0 Febru
47、ary 14, 2007 CabConn Rev 2.0 Edits from Tsuyoshi YAMANE of Matsushita 2.0 February 13, 2007 CabConn Rev 2.0 Edited by Jim Koser new chart from Hirose 2.0 February 7, 2007 CabConn Rev 2.0 Edited draft 2.02RC2 February 6, 2007 CabConnRC2_02-06-07 Work group editorials 2.01RC2 December 6, 2006 CabConnR
48、C2_12-06-06 Work group editorials 2.0RC2 July 11, 2006 CabConnRC2_7-11-06 Added durability requirements for Ruggedized Standard “A” receptacle and durability requirements for Micro series 2.0RC2 June 7, 2006 CabConnRC2_6-7-06 Added new critical dimensions drawings for standard “A” and “B” plugs and
49、receptacles and changed the criteria for “mini” products to the use of go no go gages in Appendix B 2.0RC2 March 24, 2006 CabConnRC2_3-23- 06.doc Added new IP agreement 2.0RC2 December 03,2003 CabConnRC2.doc Final edit during USB DWG meeting in Austin prior to posting the document to Web site 2.0RC1 October 29, 2002 CabConnRC1.doc Adjust formatting in technical edit pass 2.0RC August 13, 2002 Rewrite of test program to reflect cur
