1、 IEC 62715-6-2 Edition 1.0 2017-05 INTERNATIONAL STANDARD Flexible display devices Part 6-2: Environmental testing methods IEC 62715-6-2:2017-05(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this public
2、ation may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an e
3、nquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch Abo
4、ut the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant revie
5、w by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specification
6、s, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on proj
7、ects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading onl
8、ine dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical term
9、inology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedba
10、ck on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62715-6-2 Edition 1.0 2017-05 INTERNATIONAL STANDARD Flexible display devices Part 6-2: Environmental testing methods INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 31.120 ISBN 978-2-8322-437
11、0-1 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 62715-6-2:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Structure of measuring eq
12、uipment . 7 5 Standard conditions . 7 5.1 Standard reference atmosphere 7 5.2 Standard atmospheric conditions for referee measurements and tests 7 5.3 Standard atmospheric conditions for measurements and tests 8 5.4 Recovery conditions 8 5.5 Standard atmospheric conditions for assisted drying . 8 5.
13、6 Operating conditions . 8 5.7 Standard flexible display test configuration . 8 6 Measurements and analysis 9 7 Environmental testing methods 9 7.1 General . 9 7.2 Storage at high temperature 9 7.2.1 Purpose . 9 7.2.2 Test conditions 9 7.3 Storage at low temperature . 10 7.3.1 Purpose . 10 7.3.2 Tes
14、t conditions 10 7.4 Temperature change, storage . 10 7.4.1 Purpose . 10 7.4.2 Rapid change of temperature . 10 7.4.3 Specified change rate of temperature 10 7.5 Damp heat, steady state, storage 11 7.5.1 Purpose . 11 7.5.2 Test conditions 11 7.6 Damp heat, cyclic, storage 11 7.6.1 Purpose . 11 7.6.2
15、Test conditions 11 7.7 Operation at high temperature 12 7.7.1 Purpose . 12 7.7.2 Test conditions 12 7.8 Operation at low temperature 12 7.8.1 Purpose . 12 7.8.2 Test conditions 12 7.9 Damp heat, steady state, operational 13 7.9.1 Purpose . 13 7.9.2 Test conditions 13 Bibliography 14 IEC 62715-6-2:20
16、17 IEC 2017 3 Table 1 Standard conditions for referee measurements and tests 7 Table 2 Assisted drying condition . 8 Table 3 Examples of the damp heat, steady state test conditions . 11 4 IEC 62715-6-2:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FLEXIBLE DISPLAY DEVICES Part 6-2: Envir
17、onmental testing methods FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerni
18、ng standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their p
19、reparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates clos
20、ely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the releva
21、nt subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the te
22、chnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum e
23、xtent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provi
24、de conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or i
25、ts directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
26、 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attentio
27、n is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62715-6-2 has been prepared by IEC technical committee 110: Electronic disp
28、lay devices. The text of this International Standard is based on the following documents: FDIS Report on voting 110/860/FDIS 110/871/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has
29、 been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62715 series, published under the general title Flexible display devices, can be found on the IEC website. IEC 62715-6-2:2017 IEC 2017 5 The committee has decided that the contents of this document will r
30、emain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issue
31、d at a later date. 6 IEC 62715-6-2:2017 IEC 2017 FLEXIBLE DISPLAY DEVICES Part 6-2: Environmental testing methods 1 Scope This part of IEC 62715 specifies testing methods for evaluating the environmental endurance of flexible display panels and modules for use, storage and transport under assumed us
32、age environment. This part of IEC 62715 is applicable to flexible display panels and modules such as liquid crystal display devices (LCDs), electric paper display devices (EPDs), and organic light emitting diode display devices (OLEDs). This part of IEC 62715 will also be suitable for flexible panel
33、 or module with mechanical operation. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition
34、 of the referenced document (including any amendments) applies. IEC 60068-1:2013, Environmental testing Part 1: General and guidance IEC 60068-2-1, Environmental testing Part 2-1: Tests Test A: Cold IEC 60068-2-2, Environmental testing Part 2-2: Tests Test B: Dry heat IEC 60068-2-14, Environmental t
35、esting Part 2-14: Tests Test N: Change of temperature IEC 60068-2-30, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 h + 12 h cycle) IEC 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC 62341-6-2, Organic light emitting diode (OLED) disp
36、lays Part 6-2: Measuring methods of visual quality and ambient performance IEC 62341-6-3, Organic light emitting diode (OLED) displays Part 6-3: Measuring methods of image quality IEC 62715-1-1, Flexible display devices Part 1-1: Terminology and letter symbols IEC 62715-5-1 1 , Flexible display devi
37、ces Part 5-1: Measuring methods of optical performance IEC 62715-5-3 2 , Flexible display devices Part 5-3: Visual assessment _ 1Under preparation. Stage at the time of publication: IEC/FDIS IEC 62715-5-1:2017. 2Under preparation. Stage at the time of publication: IEC/FDIS IEC 62715-5-3:2017. IEC 62
38、715-6-2:2017 IEC 2017 7 IEC 62715-6-1, Flexible display devices Part 6-1: Mechanical stress test methods IEC 62679-3-2, Electronic paper display Part 3-2: Measuring method Electro-optical 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62715-1-1 and
39、IEC 60068-1 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 4 Structure of measuring equipment The system diagrams a
40、nd/or operating conditions of the measuring equipment shall comply with the structure specified in each item. 5 Standard conditions 5.1 Standard reference atmosphere The following conditions are applied: temperature: 25 C air pressure: 101,3 kPa NOTE No requirement for relative humidity is given bec
41、ause correction by calculation is generally not possible. If the parameters to be measured depend on temperature and/or pressure, and their dependence on temperature and pressure is known, the parameter values can be measured under the conditions specified in 5.3 and corrected by calculation to the
42、standard reference atmosphere above. 5.2 Standard atmospheric conditions for referee measurements and tests If the parameters to be measured depend on temperature, pressure and humidity and their dependence on temperature, pressure and humidity is unknown, the atmospheres to be specified shall be se
43、lected from the following values, as shown in Table 1. The selected values shall be noted in the relevant specifications. Table 1 Standard conditions for referee measurements and tests Temperature aC Relative humidity b% RH Air pressure bkPa 20 2 / 1 25 2 / 1 30 2 / 1 35 2 / 1 45 to 75 86 to 106 a T
44、he close tolerances may be used for the referee measurements. The wider tolerances may be used only when allowed by the relevant specification. b Inclusive values. 8 IEC 62715-6-2:2017 IEC 2017 5.3 Standard atmospheric conditions for measurements and tests Unless otherwise specified, all tests and m
45、easurements shall be carried out under standard atmospheric conditions: temperature: 15 C to 35 C relative humidity: 25 % to 85 %, where appropriate air pressure: 86 kPa to 106 kPa 5.4 Recovery conditions The recovery conditions specified in IEC 60068-1:2013, 4.4, shall be applied. The flexible pane
46、l or module shall be subjected to the recovery procedure in the chamber or otherwise as appropriate. The flexible panel or module shall then remain under standard atmospheric conditions for recovery for a period adequate for the attainment of temperature stability, with a minimum of 1 h. If required
47、 by the relevant specification, the panel or module shall be switched on or loaded and measured continuously during the recovery period. If the standard conditions given above are not appropriate for the device to be tested, the relevant specification may call for other recovery conditions. 5.5 Stan
48、dard atmospheric conditions for assisted drying The conditions specified in IEC 60068-1:2013, 4.5, shall be applied. Where assisted drying is required before commencing a series of measurements, the following conditions (see Table 2) shall be used for 6 h, unless otherwise prescribed by the relevant
49、 specification. Table 2 Assisted drying condition Temperature Relative humidity Air pressurea55 2 Not exceeding 20 % 86 kPa to 106 kPa a Inclusive values. If it is impracticable to carry out assisted drying under the standard conditions for assisted drying, a note, stating the actual conditions, shall be added to the test report. When the specified temperature for the dry heat test is lower than 55 C, the assisted dryin
