1、 IEC/TS 62771 Edition 1.0 2012-08 TECHNICAL SPECIFICATION Information model covering the contents of IEC 81346-1 and IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3 IEC/TS 62771:2012(E) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserve
2、d. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If yo
3、u have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH
4、1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical con
5、tent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a var
6、iety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available
7、 on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International
8、 Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TS 62771 Edition 1.0 2012-08 TECHNICAL SPECIFICATION Information m
9、odel covering the contents of IEC 81346-1 and IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3 INTERNATIONAL ELECTROTECHNICAL COMMISSION S ICS 01.040.01; 01.040.35 PRICE CODE ISBN 978-2-83220-309-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obt
10、ained this publication from an authorized distributor. colour inside 2 TS 62771 IEC:2012(E) CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 General 6 Annex A (normative) Reference information model 7 Annex B (normative) Data Element Type definitions . 18 Bi
11、bliography 21 Figure 1 Graphical presentation of the SCHEMA MODEL_FOR_DESIGNATION_OF_OBJECTS_AND_TERMINALS 17 TS 62771 IEC:2012(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INFORMATION MODEL COVERING THE CONTENTS OF IEC 81346-1 AND IEC 81346-2, IEC 61175, IEC 61666 AND IEC 81714-3 FOREWORD 1) Th
12、e International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical an
13、d electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical co
14、mmittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization
15、 for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commit
16、tee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is
17、accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and re
18、gional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and,
19、in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or ag
20、ents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of
21、 or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some
22、 of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may prop
23、ose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibili
24、ty of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 62771, which is a technical specification, has been prepared by IEC technical committee 3: Inf
25、ormation structures, documentation and graphical symbols. 4 TS 62771 IEC:2012(E) The text of this technical specification is based on the following documents: Enquiry draft Report on voting 3/1080/DTS 3/1102/RVC Full information on the voting for the approval of this technical specification can be f
26、ound in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/we
27、bstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The co
28、lour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. TS 62771 IEC:2012(E) 5 INFORMATION MODEL COVERING THE CONTENTS
29、 OF IEC 81346-1 AND IEC 81346-2, IEC 61175, IEC 61666 AND IEC 81714-3 1 Scope This Technical Specification contains a formal reference information model of the concepts and methods established in IEC 81346-1, IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3, which are its normative basis. The infor
30、mation model is normative with respect to data exchange. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates
31、t edition of the referenced document (including any amendments) applies. IEC 61175:2005, Industrial systems, installations and equipment and industrial products Designation of signals IEC 61360-1, Standard data elements types with associated classification scheme for electric items Part 1: Definitio
32、ns Principles and methods IEC 61360-DB, IEC Common Data Dictionary 1IEC 61666, Industrial systems, installations and equipment and industrial products Identification of terminals within a system IEC 81346-1, Industrial systems, installations and equipment and industrial products Structuring principl
33、es and reference designations Part 1: Basic rules IEC 81346-2, Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 2: Classification of objects and codes for classes IEC 81714-3, Design of graphical symbols for use in the tec
34、hnical documentation of products Part 3: Classification of connect nodes, networks and their encoding 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 81346-1, IEC 81346-2, IEC 61175, IEC 61666, and IEC 8174-3 apply. _ 1At the next revision the title
35、of the IEC 61360 series will be modified to: Standard data element types with associated classification scheme for products and services, with Part 1: Definitions, principles and methods, Part 2: EXPRESS Dictionary schema, Part 4: IEC reference collection for products and services used in electrotec
36、hnology, and Part 5: Extensions to the EXPRESS dictionary schema. Likewise the title of the database will be: IEC 61360-DB: IEC Common Data Dictionary. 6 TS 62771 IEC:2012(E) 4 General The standards IEC 81346-1, IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3 are interrelated, but the concepts use
37、d in these standards have so far only been dealt with separately in the different publications. The purpose of the present technical specification is to illustrate their relations by means of a common reference information model. When data is transferred or exchanged, the exchange shall conform to t
38、his reference model. The model is conceptual and independent from any implementation method. For the preparation of the information model, the EXPRESS modelling language, described in ISO 10303-11, has been used. The graphical form is presented using EXPRESS-G. The information model is contained in
39、Annex A. 0 provides an overview by means of a graphical representation of the structure and constraints of the application objects. The computer interpretable textual form is represented in A.3. A.1 lists the entities and attributes of the information model and A.2 contains the detailed verbal descr
40、iptions of the entities and attributes. The reference information model depicts the requirements set up, using where possible available subsets of application reference models of the ISO 10303 series. The model is not intended to be complete within the framework of neither integrated resource models
41、 nor application reference models developed within the ISO 10303 series. It is complete with respect to the requirements established within this publication. NOTE 1 For an introduction to EXPRESS-G, see http:/tc3.iec.ch/txt/xpress.pdf. NOTE 2 Annex A is available in the English language only. Annex
42、B contains a set of source definitions for Data Element Types (DETs) derived from the common reference information model. TS 62771 IEC:2012(E) 7 Annex A (normative) Reference information model A.1 List of entities and attributes This clause provides an alphabetically ordered list of the entities and
43、 attributes of the reference information model described in this Annex. A.2.1 Domain 8 A.2.1.1 classified_as S0:? . 8 A.2.1.2 related_to . 8 A.2.1.3 id 8 A.2.2 Object . 8 A.2.2.1 classified_as S0:? . 9 A.2.2.2 has_views S1:? . 9 A.2.3 Object_aspect . 9 A.2.3.1 is_a_view_of . 9 A.2.3.2 is_aspect 9 A.
44、2.3.3 consists_of S0:? . 9 A.2.4 Object_aspect_in_object_aspect . 9 A.2.4.1 uses 9 A.2.4.2 single_level_reference_designation 9 A.2.5 Aspect . 10 A.2.5.1 aspect . 10 A.2.5.2 description 10 A.2.5.3 prefix 10 A.2.6 Class . 10 A.2.6.1 id 10 A.2.6.2 description 11 A.2.6.3 used_classification_system . 11
45、 A.2.7 Classification_system 11 A.2.7.1 id 11 A.2.7.2 description 11 A.2.8 Terminal 11 A.2.8.1 classified_as S0:? . 12 A.2.8.2 belongs_to 12 A.2.8.3 (INV) has_views S1:? 12 A.2.9 Terminal_aspect 12 A.2.9.1 is_aspect 12 A.2.9.2 is_a_view_of . 12 A.2.9.3 terminal_designation . 12 A.2.10 Terminal_relat
46、ionship 12 A.2.10.1 description 12 A.2.10.2 related_terminal_aspect 13 A.2.10.3 relating_terminal_aspect . 13 A.2.11 Signal 13 A.2.11.1 variants S1:? . 13 8 TS 62771 IEC:2012(E) A.2.11.2 short_name . 13 A.2.11.3 basic_signal_name . 13 A.2.11.4 classified_as S0:? . 13 A.2.11.5 signal_domain . 13 A.2.
47、12 Signal_relationship 13 A.2.12.1 related_signal . 14 A.2.12.2 relating_signal 14 A.2.12.3 description 14 A.2.13 Signal_variant . 14 A.2.13.1 internal_signal 14 A.2.13.2 variant_domain . 14 A.2.13.3 terminals_involved_in_signal_transfer S1:? 14 A.2.13.4 id 14 A.2.13.5 additional_information . 14 B.
48、2.1 Definitions of DETs 19 B.2.2 Definitions of classes of DETs . 19 B.3.1 General . 20 B.3.2 ADA002 . 20 B.3.3 ADA003 . 20 A.2 Entity descriptions A.2.1 Domain The Domain is a collection of attributes providing information about the context of the identification of an object, in which the identific
49、ation is unambiguously defined. The data associated with a Domain are the following: classified_as S0:?; related_to; id. A.2.1.1 classified_as S0:? This attribute specifies the relation to a classification code associated to a specific Domain based on a specified classification system. A.2.1.2 related_to This attribute establishes the relation to an Object within a given Domain. A.2.1.3 id This attribute provides the identification number assigned to
