1、 IEC TS 62993 Edition 1.0 2017-07 TECHNICAL SPECIFICATION Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC IEC TS 62993:2017-07(en) THIS PUBLICATI
2、ON IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
3、 either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information.
4、 IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all elect
5、rical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue
6、The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search en
7、ables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details a
8、ll new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages.
9、Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from
10、earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 62993 Edition 1.0 2017-07 TECHNICAL SPECIFICATION
11、Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.080.30 ISBN 978-2-8322-4501-9 Registered tradema
12、rk of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC TS 62993:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Basic information for the deter
13、mination of INSULATION requirements . 11 4.1 General . 11 4.2 Voltages . 12 4.2.1 General . 12 4.2.2 Determination of RECURRING PEAK VOLTAGE 12 4.3 OVERVOLTAGE categories. 12 4.4 Material groups . 13 4.5 POLLUTION DEGREES 14 4.5.1 General . 14 4.5.2 Degrees of POLLUTION in the MICRO-ENVIRONMENT . 14
14、 4.5.3 Conditions of conductive POLLUTION . 14 4.5.4 Clearances 14 5 Dimensioning rules 15 5.1 Clearances . 15 5.2 CREEPAGE DISTANCES 17 5.2.1 General . 17 5.2.2 Voltage 17 5.2.3 POLLUTION 17 5.2.4 Shape of insulating surface . 17 5.2.5 Relationship to CLEARANCE . 18 5.2.6 CREEPAGE DISTANCES where m
15、ore than one material is used or more than one POLLUTION DEGREE occurs 18 5.2.7 CREEPAGE DISTANCES split by floating conductive part 18 5.2.8 Dimensioning of CREEPAGE DISTANCES of BASIC INSULATION, SUPPLEMENTARY INSULATION and REINFORCED INSULATION 19 5.2.9 CREEPAGE DISTANCES for DC applications . 2
16、0 5.3 SOLID INSULATION . 21 5.3.1 General . 21 5.3.2 Withstand of voltage stresses 21 6 Tests and measurements . 21 6.1 Tests 21 6.1.1 General . 21 6.1.2 Test for verification of CLEARANCES 22 6.1.3 Tests for the verification of SOLID INSULATION . 24 6.2 Measuring CLEARANCES and CREEPAGE DISTANCES 2
17、7 Bibliography 28 Figure 1 RECURRING PEAK VOLTAGE . 12 Figure 2 Determination of the width (W) and height (H) of a rib 18 Table 1 RATED IMPULSE VOLTAGES according to OVERVOLTAGE CATEGORIES 13 IEC TS 62993:2017 IEC 2017 3 Table 2 Clearances to withstand TRANSIENT OVERVOLTAGES 15 Table 3 Dimensioning
18、of clearances to WORKING VOLTAGES, TEMPORARY OVERVOLTAGES or RECURRING PEAK VOLTAGES 16 Table 4 Altitude correction factors 17 Table 5 CREEPAGE DISTANCES to avoid failure due to tracking . 20 Table 6 Test voltages based on CLEARANCES and a test site altitude of 2 000 m above sea level . 23 Table 7 C
19、orrection factors according to test site altitude for test voltages for CLEARANCES 24 Table 8 Severities for conditioning of SOLID INSULATION 26 4 IEC TS 62993:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GUIDANCE FOR DETERMINATION OF CLEARANCES, CREEPAGE DISTANCES AND REQUIREMENTS FOR
20、SOLID INSULATION FOR EQUIPMENT WITH A RATED VOLTAGE ABOVE 1 000 V AC AND 1 500 V DC, AND UP TO 2 000 V AC AND 3 000 V DC FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National C
21、ommittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Av
22、ailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental
23、 organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techn
24、ical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IE
25、C National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unifor
26、mity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) I
27、EC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure
28、 that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
29、 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refer
30、enced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The ma
31、in task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated effo
32、rts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be trans
33、formed into International Standards. IEC TS 62993, which is a technical specification, has been prepared by IEC technical committee 109: Insulation co-ordination for low-voltage equipment. IEC TS 62993:2017 IEC 2017 5 The text of this technical specification is based on the following documents: Enqu
34、iry draft Report on voting 109/158A/DTS 109/162/RVDTS Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard,
35、 the following print types are used: requirements: in roman type; NOTES: in small roman type; conformity and tests: in italic type; terms used throughout this standard which have been defined in Clause 3: SMALL ROMAN CAPITALS. The committee has decided that the contents of this publication will rema
36、in unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bil
37、ingual version of this publication may be issued at a later date. 6 IEC TS 62993:2017 IEC 2017 INTRODUCTION IEC TS 62993 is developed in a JWG between several interested committees: TC 9, SC 22G, TC 31, TC 66, TC 82, SC 121A, and ACOS under the leadership of TC 109. This document provides additional
38、 steps for a smooth transition between the low voltage (up to 1 000 V AC and 1 500 V DC) in IEC 60664 (all parts) and high voltage insulation coordination (although IEC 60071-1 is applicable from above 1 000 V, it only gives values starting at 3 600 V). IEC 60071-1 states that it does not cover the
39、requirements for human safety. Moreover IEC 60071-1 does not provide values for creepage distances. This document has been requested by several TCs dealing with equipment with a rated voltage above 1 000 V AC and 1 500 V DC up to 2 000 V AC and 3 000 VDC. It is not the intention to extend the limit
40、of low voltage range having a conventionally accepted limit of 1 000 V AC and 1 500 V DC into the high voltage range. IEC TS 62993:2017 IEC 2017 7 GUIDANCE FOR DETERMINATION OF CLEARANCES, CREEPAGE DISTANCES AND REQUIREMENTS FOR SOLID INSULATION FOR EQUIPMENT WITH A RATED VOLTAGE ABOVE 1 000 V AC AN
41、D 1 500 V DC, AND UP TO 2 000 V AC AND 3 000 V DC 1 Scope IEC TS 62993, which is a Technical Specification, gives guidance to technical committees which deal with equipment having a RATED VOLTAGE of more than 1 000 V AC and up to 2 000 V AC, or a RATED VOLTAGE of more than 1 500 V DC and up to 3 000
42、 V DC. RATED VOLTAGES up to 1 000 V AC and 1 500 V DC, as well as higher or lower internal voltages, are covered by IEC 60664-1. This document applies to equipment for use up to 2 000 m above sea level, and provides guidance for use at higher altitudes. This document gives guidance for CLEARANCES, C
43、REEPAGE DISTANCES and SOLID INSULATION for equipment to achieve safety. It includes methods of electric testing. NOTE Requirements for functional insulation are not specified as they are not regarded as safety requirements. This document does not deal with distances through liquid insulation, throug
44、h gases other than air, and through compressed air. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the
45、latest edition of the referenced document (including any amendments) applies. IEC 60068-2-2, Environmental testing Part 2-2: Tests Test B: Dry heat IEC 60068-2-14, Environmental testing Part 2-14: Tests Test N: Change of temperature IEC 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Da
46、mp heat, steady state IEC 60112:2003, Method for the determination of the proof and the comparative tracking indices of solid insulating materials IEC 60112:2003/AMD1:2009 IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests IE
47、C 61180:2016, High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements, test equipment 8 IEC TS 62993:2017 IEC 2017 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological dat
48、abases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 CLEARANCE shortest distance in air between two conductive parts SOURCE: IEC 60050-581:2008, 581-27-76 3.2 CREE
49、PAGE DISTANCE shortest distance along the surface of a solid insulating material between two conductive parts SOURCE: IEC 60050-151:2001, 151-15-50 3.3 SOLID INSULATION solid insulating material, or a combination of solid insulating materials, placed between two conductive parts or between a conductive part and a body part SOURCE: IEC 60050-903:2015, 903-04-14 3.4 WORKING VOLTAGE highest RMS value of the AC or DC voltage across any particular insul
