C0009600_752 Test Code for Performance and Accuracy of Radial Drilling Machines《旋臂钻床精度检验与动态检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 25669.1-2010 镗铣类数控机床用工具系统 第1部分：型号表示规则.pdf

GB T 25669.2-2010 镗铣类数控机床用工具系统 第2部分：型式和尺寸.pdf

GB T 2567-2008 树脂浇铸体性能试验方法.pdf

GB T 25670-2010 硬质合金斜齿立铣刀.pdf

GB T 25671-2010 硬质涂层高速钢刀具 技术条件.pdf

GB T 25672-2010 电锤钻和套式电锤钻.pdf

GB T 25697-2010 道路施工与养护机械设备 沥青路面就地热再生复拌机.pdf

GB T 25701-2010 复摆颚式破碎机 金属单耗.pdf

GB T 25707-2010 液压防爆提升机和提升绞车.pdf