C0023600_895 75 degree Counter sink Drill《７５°沉钻头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L22-241-1987 Bolt bihexagonal head ISO thread 4H class fine pitch 《十二角头螺栓 ISO螺纹 细牙4H级》.pdf

NF L22-242-1987 Bolt bihexagonal head with locking hole ISO thread 4H class fine pitch 《带锁孔的十二角头螺栓 ISO螺纹 细牙4H级》.pdf

NF L22-243-1987 Bolt bihexagonal head necked shank ISO thread 4H class fine pitch 《带颈杆十二角头螺栓 ISO螺纹 细牙4H级》.pdf

NF L22-244-1987 Bolt bihexagonal head with locking hole necked shank ISO thread 4H class fine pitch 《带锁紧孔和颈杆的十二角头螺栓 ISO螺纹 细牙4H级》.pdf

NF L22-246-1989 Aircraft bolts and nuts Bolt bihexagonal head ISO M thread 4G class Fine pitch 《航空用螺栓螺母 十二角头螺栓 ISO M 螺纹 4G 级》.pdf

NF L22-247-1989 Aircraft bolts and nuts Bolt bihexagonal head with locking hole ISO M thread 4G class Fine pitch 《航空用螺检螺母 带锁紧孔十二角头螺栓 ISO M 螺纹 4G 级 小螺距》.pdf

NF L22-248-1987 Bolt bihexagonal head necked shank ISO thread 4G class fine pitch 《带颈杆的十二角头螺栓 ISO螺纹 细牙4G级》.pdf

NF L22-249-1987 Bolt bihexagonal head with locking hole necked shank ISO thread 4G class fine pitch 《带锁孔和颈杆的十二角头螺栓 ISO螺纹 细牙4G级》.pdf

NF L22-251-1968 General purpose 100 degrees countersunk head screws with A I C M A Cross recess 《普通用途带A I C M A 十字槽、100沉头螺钉》.pdf