C0039300_402 Thick Bearing Sleeve《厚轴承衬》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2782-5 Method 540G-1995 Methods of testing plastics - Optical and colour properties weathering - Methods of exposure to laboratory light sources - Open flame carbon-arc lamps《塑料.pdf

BS 2782-6 Method 621C-1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials《塑料试验方法 第6部分 尺寸特性 模制材料体积系数测定》.pdf

BS 2782-6 Method 621D-1978 Methods of testing plastics - Dimensional properties - Determination of compacted apparent bulk density of PVC resins《塑料试验方法 第6部分 尺寸特性 聚氯乙烯树脂压实表观体积密度测定》.pdf

BS 2782-6 Method 630A-1994 Methods of testing plastics - Dimensional properties - Determination of thickness by mechanical scanning of flexible sheet《塑料试验方法 第6部分 尺寸特性 用机械扫描法测定挠性片厚度.pdf

BS 2782-6 Method 631A-1993 Methods of testing plastics - Dimensional properties - Determination of gravimetric thickness and yield of flexible sheet《塑料的试验方法 第6部分 尺寸特性 柔性板材重量厚度分析和屈服.pdf

BS 2782-6 Method 632A-1993 Methods of testing plastics - Dimensional properties - Determination of length and width of flexible sheet《塑料试验方法 第6部分 尺寸特性 柔性板材长度和宽度测定》.pdf

BS 2782-6 Method 640A-1979 Methods of testing plastics - Dimensional properties - Determination of shrinkage of test specimens in the form of bars of compression moulded thermosett.pdf

BS 2782-6 Method 641A-1983 Methods of testing plastics - Dimensional properties - Determination of dimensional stability at 100 C of flexible polyvinyl chloride sheet《塑料试验方法 第6部分 尺.pdf

BS 2782-6 Method 643A-1976 Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications《塑料的试验方法 第6部分 尺寸特性 试验方法643A .pdf