C0041300_317 Fundamental Symbols for Electric Communications Engineering《基本符号（电讯工程用）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A325-2009ae1 Standard Specification for Structural Bolts Steel Heat Treated 120 105 ksi Minimum Tensile Strength.pdf

ASTM A325-2010 Standard Specification for Structural Bolts Steel Heat Treated 120 105 ksi Minimum Tensile Strength《最小抗拉强度为120 105ksi的热处理钢制结构螺栓标准规范》.pdf

ASTM A325-2010e1 Standard Specification for Structural Bolts Steel Heat Treated 120 105 ksi Minimum Tensile Strength《最小拉伸强度为120 105 ksi的热处理钢制结构螺栓标准规格》.pdf

ASTM A325M-2005 Standard Specification for Structural Bolts Steel Heat Treated 830 MPa Minimum Tensile Strength [Metric]《最小抗拉强度为830Mpa的热处理钢结构螺栓标准规范(米制)》.pdf

ASTM A325M-2008 Standard Specification for Structural Bolts Steel Heat Treated 830 MPa Minimum Tensile Strength [Metric].pdf

ASTM A325M-2009 Standard Specification for Structural Bolts Steel Heat Treated 830 MPa Minimum Tensile Strength [Metric]《最小抗拉强度为830Mpa的热处理钢结构螺栓标准规范(米制)》.pdf

ASTM A325M-2013 Standard Specification for Structural Bolts Steel Heat Treated 830 MPa Minimum Tensile Strength (Metric)《最小抗拉强度为830 MPa的热处理钢结构螺栓的标准规格(公制)》.pdf

ASTM A327 A327M-2011 Standard Test Methods for Impact Testing of Cast Irons《铸铁冲击试验的标准试验方法》.pdf

ASTM A327 A327M-2011(2017) Standard Test Methods for Impact Testing of Cast Irons《铸铁冲击试验的标准试验方法》.pdf