C0061300_402 Method of Sampling for Refractory Bricks《耐火砖之取样法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 15614-3-2008 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3 Fusion welding of non-alloyed and low-alloyed .pdf

EN ISO 15614-4-2005 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4 Finishing welding of aluminium castings (Incor.pdf

EN ISO 15614-5-2004 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5 Arc welding of titanium zirconium and their al.pdf

EN ISO 15614-6-2006 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6 Arc and gas welding of copper and its alloys《金.pdf

EN ISO 15614-7-2007 6912 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7 Overlay welding《金属材料焊接程序的规范和鉴定 焊接程序试验 第7部分 覆.pdf

EN ISO 15614-7-2016 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7 Overlay welding《金属材料的焊接工艺试验7部分焊接程序的规范和鉴定 堆焊(IS.pdf

EN ISO 15614-8-2002 Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8 Welding of Tubes to Tube-Plate Joints《金属材料焊接程序的规范.pdf

EN ISO 15614-8-2016 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 Welding of tubes to tube-plate joints《金属材料的焊接工.pdf

EN ISO 15615-2013 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - Safety requirements in high-pressure devices《气焊设备 焊接 切割和相关工艺用乙炔多头.pdf