C0120600_809 Heavy Round File for Smith《铁工用重式圆锉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 2232G-1996 Tolerances Carbon Steel Sheet Strip and Plate《碳素钢片材 带材和板材的公差[代替 SAE MAM 2232C SAE MAM 2232B SAE MAM 2232A]》.pdf

SAE AMS 2241S-2016 Tolerances Corrosion and Heat-Resistant Steel Iron Alloy Titanium and Titanium Alloy Bars and Wire.pdf

SAE AMS 2242G-2008 Tolerances Corrosion and Heat Resistant Steel Iron Alloy Titanium And Titanium Alloy Sheet Strip and Plate《腐蚀公差和耐热钢、铁合金、钛和钛合金薄板材、带材和厚板材》.pdf

SAE AMS 2243K-2013 Tolerances Corrosion and Heat-Resistant Steel Tubing《耐腐蚀和耐热的钢管公差》.pdf

SAE AMS 2245B-2003 Tolerances Titanium and Titanium Alloy Extruded Bars Rods and Shapes《钛和钛合金挤压条材 棒材和型材的公差》.pdf

SAE AMS 2249G-2009 Chemical Check Analysis Limits Titanium and Titanium Alloys《化学检验分析限值 钛及钛合金》.pdf

SAE AMS 2249H-2017 Chemical Check Analysis Limits Titanium and Titanium Alloys.pdf

SAE AMS 2251H-2006 Tolerances Low-Alloy Steel Bars《低合金钢棒公差》.pdf

SAE AMS 2253E-1983 Tolerances Carbon and Alloy Steel Tubing《碳和合金钢管公差》.pdf