C0121900_952 Method of Test for Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test《石油产品铜片腐蚀性测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE ARP 1217A-1997 Instrumentation Requirements for Turboshaft Engine Performance Measurements《涡轴发动机性能测试仪表要求》.pdf

SAE ARP 1231A-2001 Gland Design Elastomeric O-Ring Seals General Considerations《压盖设计 合成橡胶O型密封圈 一般考虑》.pdf

SAE ARP 1231B-2017 Gland Design Elastomeric O-Ring Seals General Considerations.pdf

SAE ARP 1232B-2001 Gland Design Elastomeric O-Ring Seals Static Radial《压盖设计 合成橡胶O型密封圈 静态径向》.pdf

SAE ARP 1233A-2001 Gland Design Elastomeric O-Ring Seals Dynamic Radial 1500 psi Max《最大值为1500 psi的动态径向合成橡胶O型密封圈压盖设计》.pdf

SAE ARP 1234B-2001 Gland Design Elastomeric O-Ring Seals Static Axial Without Back-Up Rings《压盖设计 合成橡胶O型密封圈 静态轴向 无保护圈》.pdf

SAE ARP 1247D-2010 Aircraft Ground Support Equipment General Requirements《航空器地勤支援设备一般要求》.pdf

SAE ARP 1256D-2011 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines《航空涡轮发动机连续采样气体排放测量程序》.pdf

SAE ARP 1258B-1993 Qualification of Hydraulic Tube Joints to Specified Flexure Fatigue Requirements《液压管接头的特殊柔性疲劳试验的质量要求》.pdf