C0169500_402 Dimethyl Sulphate《化学试药（硫酸二甲脂）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS-ISO 6980-1986 Reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy《参照β辐射校准剂量计和剂量.pdf

SIS SS-ISO 6986-1985 Side and face milling (slotting) cutters with indexable inserts- Dimensions《可转位三面刃（槽式）铣刀 尺寸》.pdf

SIS SS-ISO 6987-2-1992 Indexable inserts for cutting tools Hardmetal (carbide) inserts with rounded corners with partly cylindrical fixing hole Part 2 Dimensions of inserts with .pdf

SIS SS-ISO 7 1-1985 Pipe threads where pressure-tight joints are made on the threads - Part 1 Desig- nation dimensions and tolerances《压力密封接头在螺纹上的管螺纹 第1部分：名称，尺寸和公差》.pdf

SIS SS-ISO 7 2-1986 Pipe threads where pressure-tight joints are made on the threads - Part 2 Veri- fication by means of limit gauges《压力密封接头在螺纹上的管螺纹 第2部分：用极限规验证》.pdf

SIS SS-ISO 700-1985 Power sources for manual metal are welding with covered electrodes and for the TIG process《带涂剂焊条手动金属电弧焊用电源和TIG焊工艺》.pdf

SIS SS-ISO 7006-1982 Woodworking machines - Diameters of spindles for receiving circular saw- blades《木工机床 接受圆形锯片的锭子直径》.pdf

SIS SS-ISO 7007-1984 Woodworking machines - Table band- sawing machines - Nomenclature and acceptance conditions《木工机床 台式带锯床 术语表及验收条件》.pdf

SIS SS-ISO 7008-1984 Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions《木工机床 带或不带移动工作台的单刀片圆锯架 术语表和验收.pdf