1、 IEC 60335-2-13 Edition 6.0 2009-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Appareils lectrodomestiques et analogues Scurit Partie 2-13: Exigences particu
2、lires pour les friteuses, les poles frire et appareils analogues IEC 60335-2-13:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
3、 electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, pl
4、ease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniqu
5、e, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez
6、 le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepa
7、res and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have bee
8、n published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published -
9、 webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing m
10、ore than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need furthe
11、r assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies appar
12、entes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche a
13、vance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles pu
14、blications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinition
15、s en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des question
16、s contactez-nous: csciec.ch. IEC 60335-2-13 Edition 6.0 2009-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Appareils lectrodomestiques et analogues Scurit Pa
17、rtie 2-13: Exigences particulires pour les friteuses, les poles frire et appareils analogues INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE P ICS 13.120, 97.040.50 PRICE CODE CODE PRIX ISBN 978-2-8322-0908-0 Registered trademark of the International Electrotechn
18、ical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60335-2-13 IEC:2009 CONTENTS FOREWORD
19、 . 3 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Definitions 7 4 General requirement . 8 5 General conditions for the tests 8 6 Classification 8 7 Marking and instructions . 8 8 Protection against access to live parts 9 9 Starting of motor-operated appliances 9 10 Power input and curre
20、nt . 9 11 Heating 9 12 Void 10 13 Leakage current and electric strength at operating temperature 10 14 Transient overvoltages . 10 15 Moisture resistance 10 16 Leakage current and electric strength . 11 17 Overload protection of transformers and associated circuits . 11 18 Endurance 11 19 Abnormal o
21、peration 11 20 Stability and mechanical hazards . 12 21 Mechanical strength . 12 22 Construction . 12 23 Internal wiring . 12 24 Components . 12 25 Supply connection and external flexible cords 13 26 Terminals for external conductors . 13 27 Provision for earthing . 13 28 Screws and connections . 13
22、 29 Clearances, creepage distances and solid insulation 13 30 Resistance to heat and fire . 13 31 Resistance to rusting 14 32 Radiation, toxicity and similar hazards 14 Annexes . 15 Bibliography 16 60335-2-13 IEC:2009 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APP
23、LIANCES SAFETY Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The
24、 object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifi
25、cations (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations
26、liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex
27、press, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Comm
28、ittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Natio
29、nal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does
30、not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have
31、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe
32、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicati
33、ons is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standar
34、d IEC 60335-2-13 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This sixth edition cancels and replaces the fifth edition published in 2004 including its Amendment 1 (2005) and Amendment 2 (2008). It constitutes a technical revision. The princ
35、ipal changes in this edition as compared with the fifth edition of IEC 60335-2-13 are as follows (minor changes are not listed): the scope is changed to cover household and similar use, additional instructions are added to reflect the content of the scope (7.12). 4 60335-2-13 IEC:2009 This bilingual
36、 version (2013-07) corresponds to the monolingual English version, published in 2009-12. The text of this standard is based on the following documents: FDIS Report on voting 61/3873/FDIS 61/3925/RVD Full information on the voting for the approval of this standard can be found in the report on voting
37、 indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on t
38、he basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for deep fa
39、t fryers, frying pans and similar appliances. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. NOTE 2
40、 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; addit
41、ional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associate
42、d noun are also in bold. The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publi
43、cation will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication
44、in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months fr
45、om the date of publication. 60335-2-13 IEC:2009 5 The following differences exist in the countries indicated below. 3.1.9: Normal operation is different (USA). 7.1: Non-immersible appliances are required to be marked with a warning against immersion (Canada and USA). 7.1: Appliances are required to
46、be marked with the identity of the appropriate connector when it incorporates a thermostat (Canada and USA). 11.2: Plywood 9,5 mm thick is used for the test corner (USA). 11.7: Appliances are operated until a specified quantity of food is cooked (USA). 11.8: The oil temperatures are higher (USA). 19
47、2: The test is different (USA). 19.13: The oil temperatures are higher (USA). 19.101: The test is not carried out (USA). 25.7: The types of cords are different (USA). 30.2: For frying pans, 30.2.3 applies (USA). 6 60335-2-13 IEC:2009 INTRODUCTION It has been assumed in the drafting of this Internat
48、ional Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
49、 normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is
