1、 IEC 60335-2-72 Edition 4.0 2016-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Household and similar electrical appliances Safety Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use Appareils lectrodomestiques et analogues Scurit Partie
2、 2-72: Exigences particulires pour les machines de traitement des sols avec ou sans commande de dispositif de dplacement, usage commercial IEC 60335-2-72:2016-05(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise
3、 specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any question
4、s about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut t
5、re reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir d
6、es droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The Int
7、ernational Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Plea
8、se make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Repor
9、ts and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and
10、 withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of
11、electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in
12、 English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publica
13、tion or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux t
14、echnologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour co
15、nsulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouve
16、r des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Publis
17、hed dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes q
18、uivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues d
19、epuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60335-2-72 Edition 4.0 2016
20、-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Household and similar electrical appliances Safety Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use Appareils lectrodomestiques et analogues Scurit Partie 2-72: Exigences particulires po
21、ur les machines de traitement des sols avec ou sans commande de dispositif de dplacement, usage commercial INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 97.080 ISBN 978-2-83223-313-9 Registered trademark of the International Electrotechnical Commission Marq
22、ue dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 60335-2-72:2016 IEC 2016 CONTENTS FOREW
23、ORD . 4 INTRODUCTION . 7 1 Scope 8 2 Normative references. 9 3 Terms and definitions 10 4 General requirement 13 5 General conditions for the tests 13 6 Classification . 14 7 Marking and instructions 15 8 Protection against access to live parts . 19 9 Starting of motor-operated appliances 20 10 Powe
24、r input and current . 20 11 Heating . 20 12 Void 20 13 Leakage current and electric strength at operating temperature 20 14 Transient overvoltages. 21 15 Moisture resistance . 21 16 Leakage current and electric strength . 22 17 Overload protection of transformers and associated circuits 23 18 Endura
25、nce . 23 19 Abnormal operation . 23 20 Stability and mechanical hazards . 24 21 Mechanical strength . 29 22 Construction 31 23 Internal wiring 35 24 Components 35 25 Supply connection and external flexible cords 36 26 Terminals for external conductors 37 27 Provision for earthing . 37 28 Screws and
26、connections 37 29 Clearances, creepage distances and solid insulation 38 30 Resistance to heat and fire 38 31 Resistance to rusting . 38 32 Radiation, toxicity and similar hazards . 38 Annexes . 43 Annex A (informative) Routine tests . 44 Annex B (normative) Appliances powered by rechargeable batter
27、ies that are recharged in the appliance 45 Annex L (informative) Guidance for the measurement of clearances and creepage distances 53 Annex S (normative) Battery-operated appliances powered by batteries that are non- rechargeable or not recharged in the appliance . 54 IEC 60335-2-72:2016 IEC 2016 3
28、Annex AA (normative) Precast paving slabs . 58 Annex BB (normative) Requirements for internal combustion engine powered machines using liquefied petroleum gas (LPG) . 59 Annex CC (normative) Falling-object protective structures (FOPS) Dynamic test and performance requirements 62 Annex DD (informativ
29、e) Emission of acoustical noise 65 Annex EE (informative) Emission of vibration . 68 Bibliography . 69 Figure 101 Impact test apparatus . 39 Figure 102 Apparatus for testing the abrasion resistance of current-carrying hoses 40 Figure 103 Apparatus for testing the resistance to flexing of current-car
30、rying hoses . 41 Figure 104 Configuration of the hose for the freezing treatment . 41 Figure 105 Flexing positions for the hose after removal from the freezing cabinet . 42 Figure 106 Warning symbol: Do not inhale exhaust fumes 42 Figure B.101 Forms of constructions for cleaning machines covered by
31、Annex B 46 Figure B.102 Circuit for testing battery chargers (taken from IEC 60335-2-29) 52 Figure CC.1 Satisfactory protection by the overhead guard . 63 Figure CC.2 Admissible deformation when the overhead guard is supported at all sides 64 Figure CC.3 Admissible deformation when the overhead guar
32、d is supported at one side 64 Table 12 Pull force and torque . 37 Table DD.1 Determination of uncertainty 67 4 IEC 60335-2-72:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-72: Particular requirements for floor treatment machines w
33、ith or without traction drive, for commercial use FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation
34、on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
35、Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparati
36、on. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
37、 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are m
38、ade to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications trans
39、parently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent c
40、ertification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability
41、 shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
42、 legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this
43、 publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60335-2-72 has been prepared by subcommittee 61J:
44、Electrical motor-operated cleaning appliances for commercial use, of IEC technical committee 61: Safety of household and similar electrical appliances. This fourth edition cancels and replaces the third edition published in 2012. It constitutes a technical revision. This edition includes the followi
45、ng significant technical changes with respect to the previous edition (minor changes are not listed): the title has been changed for better distinction with regard to IEC 60335-2-67; the scope has been revised editorially to avoid misunderstandings; Clause 3 has been revised with regard to the requi
46、rements revised; IEC 60335-2-72:2016 IEC 2016 5 the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22, and 25; the markings and instructions (Clause 7) have been revised basically; a new Annex
47、 DD Emission of acoustical noise was added; and a new Annex EE Emission of vibration was added. The text of this standard is based on the following documents: FDIS Report on voting 61J/625/FDIS 61J/636/RVD Full information on the voting for the approval of this standard can be found in the report on
48、 voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.
49、 NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for floor treatment machines with or without traction drive, for commercial use. When a particular sub clause of Part 1 is not mentioned in this part 2, that sub
